曝光臺 注意防騙 網曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

may be included in the route.
With the first ROUTES catalog page is displayed (DATA-PILOTROUTES),
proceed as follows:
1. Select the CREATE option to display an empty ROUTE page.
The cursor will be over the route name field. The route may be
given a name with up to eight characters, if desired. If so, then
the route title in the directory will be the first waypoint name and
the route title.
2. Type in the desired route name and press ENTER.
3. Enter the identifier of the desired waypoint. The LIST function
may be used to locate and enter the identifier or the identifier
may be typed in. When the identifier is entered, the cursor will
advance to the next identifier entry field.
Add Departure SID
With the departure airport defined as the first waypoint, use the
following procedure to link a SID to the route:
1. Press FPL then MENU keys.
2. Select DEPART line select key. The DEPARTURE 1/1 page will
appear with a list of runways for that airport. Note: If the
departure airport has no SIDs or Runways in the data base, then
(NONE) will be displayed.
3. Select the reference number of the departure runway.
4. Select the reference number of the desired SID.
5. Select the reference number of the desired enroute transition.
6. Press ROUTE line select key to return to route pages.
7. Place cursor over first blank waypoint field after SID.
Section IV
Data Base
4-26 2423sv602
Change 1
Add Waypoints Using LIST-AIRWAYS Feature
With the route page displayed (usually the last page as the route is
being built), position the cursor over the first blank field following an
intersection or navaid that’s in the Navigation data base.
NOTE: If the cursor had been placed after an airport or an offairway
intersection or navaid, the AIRWAYS selection on
the LIST page will be displayed in small green font
indicating that the selection is not available.
1. Press the LIST function key and press the AIRWAYS line select
key [2R]. A list of airways through the previous
navaid/intersection will be displayed.
2. Enter the reference number of the desired airway. The airway
termination page will then be displayed showing intersections
and navaids that make up the selected airway. The closest
twelve points will be displayed on the first page, the next closest
twelve on page two, etc. Select the reference number of the
termination fix, or type in the ident.
3. All waypoints between the initial and termination points will be
automatically entered into the route.
4. The cursor will automatically be positioned over the next blank
field. Repeat steps 1 and 2 to complete the route using
additional airways.
Section IV
Data Base
2423sv602 4-27
Change 1
Adding STAR and Approach
Make sure that the last waypoint of the route is the destination
airport. Proceed as follows to add a STAR and Approach, if desired.
1. Press FPL then MENU key to display FPL MENU 1/2 page.
2. Press ARRIVE line select key to display ARRIVAL 1/1 page.
3. Select Runway, STAR and Approach using Reference Number
process.
Editing Stored Routes
Once a route has been constructed and stored in the data base, it
can be accessed at any time for editing. Route editing is always
accomplished on the normal ROUTE display page. The following
procedure can be used to access the desired ROUTE display page
for editing:
1. Access the Data Base Menu page by pressing the DATA-PILOT
keys.
2. Access the ROUTES Catalog by selecting the ROUTES option.
If the desired route is not displayed, use the NEXT and PREV
keys to locate the route.
3. Enter the reference number of the desired ROUTE. The first
page of that ROUTE will be displayed.
Insert Gap Into Route
A gap is a break in the route designed to prevent the navigation
computer from making an automatic leg change. Gaps have no
effect until the route is copied into the flight plan. With the first
ROUTE page in view, proceed as follows
1. Use the NEXT and PREV function keys to display the desired
waypoint.
2. Use the line select keys to position the cursor over the waypoint
that will follow the GAP.
3. Press the LIST function key to access the normal LIST page.
4. Press the GAP line select key. The display will return to the
ROUTE page and the gap (*GAP*) will have been inserted.
Gaps are deleted from the route in the same manner as waypoints.
To delete a gap from the route, refer to the DELETE WAYPOINT(S)
FROM ROUTE procedure in this section.
Section IV
Data Base
4-28 2423sv602
Change 1
CAUTION: WHEN A GAP HAS BEEN INSERTED, THE FLIGHT
　
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：龐巴迪挑戰者手冊10(45)