ATA ANNUAL INSPECTION (AI)
LANDING GEAR INSPECTION (AREA 700) AREA OTHER
INSPECTION PERFORMED
BY
32-00 LANDING GEAR INSPECTION (AREA 700) 700  
32-00 1) Perform an overall visual inspection of area 700. 700  
11-00 2) Check installation and legibility of exterior placards and markings - refer to 11-20-00 1. 700 NOTE 1 
24-00 3) Visually inspect all cable connections on the nose and main landing gears. 700  
 Replace cables if damaged. Inspect cables for routing, clamp security, lugs and cleanliness.   
32-40 4) Remove and check main landing gear wheel caps 737 and 747 for condition - refer to 32-41-01 201. 700  
32-40 5) Deflate the tires and remove the wheels - refer
to 12-14-01 301, 32-41-01 201, 32-41-02 201. 700  
32-40 6) Thoroughly fluorescent dye penetrant inspect the wheels and the wheel axles for cracks, distortion and evidence of wear and corrosion. 700  
32-40 7) Visually inspect the tires ; look for evidence of uneven wear, cuts, distortion and displacement of the tire on the wheel. 700  
32-40 8) Inspect the brake hydraulic system unions for security and tigthness. 700  
32-40 9) Visually inspect the braking systems for condition,
attachment, brake plate and disk wear. 700  
32-10 10) Visually inspect the main landing gear bodies and rocker beams for cracks and distortion ; thoroughly inspect the shock absorber and hinged strut attachment bosses. 700  
32-10 11) Visually inspect the main landing gear doors, the hinges and the control rod, inspect for security, excessive play, cracks and distortion. 700  
32-10 12) Visually inspect the main landing gear axles and hinge bearings for cracks, distortion, evidence of wear and corrosion. Check for excessive play ; a friction mark on the stop stiffener shows that the play in the bearing ball joint is excessive. 700  
32-10 13) Check the main landing gear shock absorbers for inflation and leaks - refer to 12-14-02 301. 700  

NOTE 1 : If a 100-hr. inspection has been carried out during the last 3 months, do not perform this operation unless this annual inspection replaces a 100-hr. inspection. For US registered aircraft, perform all operations.
ADAA
Validity : S / N 1 - 9999 05-20-06Page 212
(EA) JUN 01
 

ATA ANNUAL INSPECTION (Al)
LANDING GEAR INSPECTION (AREA 700) AREA OTHER INSPECTION
PERFORMED
　
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：TB 20 MAINTENANCE MANUAL 05 TIME LIMITS MAINTENANCE CHECKS TB20飛機維護手冊 05 時間限制維護檢查 2(58)