曝光臺 注意防騙 網曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

BY
30-10 15) Visually inspect the porous leading edges (if installed) on the R.H. wing. 600  
33-40 16) Visually inspect the navigation lights on the R. H. wing and 600  
 (if installed) the anti-collision and identification lights.   
 Check the domes, glasses, supports and attach fittings for condition.   
34-20 17) Check the flux valve (if installed) and the support for general condition, corrosion, attachment and wiring. 600  
57-10 18) Check the pins of the R.H. wing-to-fuselage front, main and rear attachments ; make sure the nuts have not rotated, in case of doubt, torque the nuts - refer
to 20-00-01 201. 600  
57-20 19) Visually inspect the R.H. main-landing-gear attachment area for loose rivets, distortion, cracks and evidence of corrosion. 600  
57-20 20) Visually inspect the R.H. main-landing-gear hinged strut attachment bearing and the retraction actuator
attachment fitting. 600  
57-20 21) Thoroughly inspect the R.H. main-landing-gear hinged strut attachment bearing - refer to the latest issue of SOCATA SB 10-080-57. 600 6000 Idg. or
4000 hrs,
then 
   1500 Idg. or 
   1000 hrs 
57-20 22) Visually inspect the R.H. spar for loose rivets, cracks, distortion and evidence of corrosion. 600  
57-20 23) Visually inspect the attach fittings and check the R.H. wing front attachment for cracks and evidence of
corrosion. 600  
57-20 24) Visually inspect the attach fittings and check the R.H. wing rear attachment for cracks and evidence of
corrosion. 600  
57-20 25) Visually inspect the attach fittings and check the R.H. wing main attachment spacers for cracks and evidence of corrosion. 600  
57-20 26) Visually inspect the R.N. wing ribs and inner skin for loose rivets, cracks, distortion and evidence of corrosion. 600  
57-20 27) Inspect the R.H. wing upper and lower surface skins for condition, inspect the anti-skid coating and anti-wear 600  
 PTFE located at flap/wing junction for condition.   
57-30 28) Visually inspect the R.H. wing tip attach fittings. 600  

AIM
Validity : S / N 1 - 9999 05 20 05 (JA) Page 223
JUN 01
 

ATA "80A" MAJOR INSPECTION
R.H. WING INSPECTION (AREA 600) AREA OTHER INSPECTION
PERFORMED
BY
57-30 29) Visually inspect the visible portions of the R.H. wing tip for loose rivets, cracks and distortion. 600  
　
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：TB 20 MAINTENANCE MANUAL 05 TIME LIMITS MAINTENANCE CHECKS TB20飛機維護手冊 05 時間限制維護檢查 2(38)