曝光臺 注意防騙 網曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

LANDING GEAR INSPECTION (AREA 700) AREA OTHER
INSPECTION PERFORMED
BY
32-00 LANDING GEAR INSPECTION (AREA 700) 700  
32-00 1) Perform an overall visual inspection of area 700. 700  
11-00 2) Check installation and legibility of exterior placards and markings - refer to 11-20-00 1. 700  
32-40 3) Visually inspect (do not remove) the wheels for wear, distortion or cracks. 700  
32-40 4) Visually inspect the tires ; look for evidence of uneven wear, cuts, distortion and displacement of the tire on the wheel. 700  
32-40 5) Visually inspect the braking systems for condition,
attachment, brake plate and disk wear. 700  
32-20 6) Visually inspect the nose landing gear leg, the sliding body and the fork for cracks and distortion ; thoroughly inspect the half-scissors and hinged strut attachment bosses. 700  
 In case of doubt, remove, inspect and reinstall the
half-scissors - refer to 32-20-03 201.   
32-20 7) Visually inspect the nose landing gear mount for cracks. 700  
32-20 8) Check that the nose landing gear mount is correctly attached to the firewall. Check the red painted marks on the bolts for alignment. 700  
32-20 9) Visually inspect the nose landing gear wheel-centering device. 700  
32-30 10) Replace the landing gear actuating cylinders. 700 30000
cycles 
32-30 Landing gear struts without grease nipples 700 500 hrs or 
 11) Remove the front part of the nose landing gear strut and remove the main landing gear struts. Thoroughly inspect the struts for excessive play, cracks, distortion and
evidence of corrosion.  1 year 
 Lubricate the inner flanks of the yokes, the axles and the ball joints - refer to the latest issue of SOCATA SB 45.   
 Install the struts - refer to 32-30-04 201, 32-30-03 201.   
32-30 All 700  
 12) Visually inspect the nose landing gear and main landing gear struts for excessive play, cracks, distortion and evidence of corrosion.   
32-40 13) Check tire inflation pressures - refer to 12-14-01 301. 700  

AIAA
Validity : S / N 1 - 9999 05-20-04 (JA) Page 208
JUN 01
 

ATA "4A" INSPECTION - 100 HOURS
LANDING GEAR INSPECTION (AREA 700) AREA OTHER
INSPECTION PERFORMED
BY
32-30 14) Change the landing gear hydraulic fluid and replace the emergency valve seals - refer to 12-13-03 301,
12-13-04 301, 32-35-02 201. 200 3 years 
　
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：TB 20 MAINTENANCE MANUAL 05 TIME LIMITS MAINTENANCE CHECKS TB20飛機維護手冊 05 時間限制維護檢查 2(10)