曝光臺 注意防騙 網曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

71-20 6) Visually check that the engine mount is correctly attached to the firewall. Check the red painted marks on the bolts for alignment. 100  
71-20 7) Check the engine attaching bolts for proper torque and check the vibration isolators for wear. In case of wear, replace all the vibration isolators - refer to 71-20-00 201. 100  
21-40 8) Perform a detail examination of air regulation hose(s) and firewall-mounted box(es) for cracks. 100  
21-55 9) Visually inspect the vapor cycle cooling compressor and the support (if installed) - refer to the latest issue of 100  
 KEITH MM/IPC No. 20-0101SM.   
24-30 10) Perform an overhaul of the alternator. 100 Associated
with engine
overhaul 
24-30 11) Visually inspect the alternator, attach fittings, noise filter and connections. 100  
24-30 12) Check the condition and tension of the alternator belt - refer to 24-30-01 201. 100  
 Check the tension of a new belt after the first 25 operating hours.   
 Refer to the latest issue of LYCOMING Service   
 Instruction 1129, for belt tension adjustment.   
21-55 13) Check the belt of the vapor cycle cooling compressor (if installed) for condition and tension - refer to 21-55-01 201. 100  
 Check the tension of a new belt after the first 25 operating hours.   

AIM
Validity : S / N 1 - 9999 05-20 Page N 01
05 (JA) JUN u
 

ATA "80A" MAJOR INSPECTION
ENGINE COMPARTMENT INSPECTION (AREA 100) AREA OTHER
INSPECTION PERFORMED
BY
80-00 14) Perform an overhaul of the starter. 100 Associated
with engine
overhaul 
80-00 15) Visually inspect the starter, the attach fittings and the connections. To adjust the clearance between the
toothed ring and the LYCOMING starter drive gear, refer to the latest issue of TEXTRON LYCOMING Service 100  
 Instruction No. 1447.   
80-00 16) Visually inspect the starter relay (if battery at the front), check attach fittings, lugs and terminal covers. 100  
24-00 17) Visually inspect the battery relay and the ground power unit relay (front battery option). Check attachments, lugs and terminal covers. 100  
24-00 18) Check all cable connections to engine and accessories, engine mount, firewall. 100  
 Replace cables if damaged. Inspect cables for routing, clamp security, cleanliness, lugs and terminal covers.   
28-20 S / N 1 - 7?0 100  
　
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：TB 20 MAINTENANCE MANUAL 05 TIME LIMITS MAINTENANCE CHECKS TB20飛機維護手冊 05 時間限制維護檢查 2(40)