C.
Access
(1)
Location Zone
801 Nose Cargo Door
D.
Prepare For Operation
S 422-037
(1)
Install the safety barrier across the door opening.
S 862-038
(2)
Open these circuit breakers and attach DO-NOT-CLOSE tags:
(a)
On the Auxilary External 2 Power Center-Right panel P715: 1) NOSE CARGO DOOR (115V AC)
(b)
On the Power Distribution Center-Right panel P415: 1) 415F16 NOSE CARGO DOOR CONT (28V DC)
(c)
On the Nose Cargo Door Power panel H122:
1) LATCHES 1-4 LEFT
2) LATCHES 1-4 RIGHT
3) LATCHES 5-8 LEFT
4) LATCHES 5-8 RIGHT
5) PULL UP CAM
6) DOOR LIFT
S 032-005
(3)
Disconnect the flexible drive shafts at the linear actuators.
E.
Open Nose Cargo Door
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
52-31-00
ALL ú ú 02 Page 206 ú Feb 18/01
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400
MAINTENANCE MANUAL
S 982-006
CAUTION: DO NOT CRANK THE LATCH ACTUATOR WITH MORE THAN 8 POUND-FEET
_______ TORQUE. THIS CAN CAUSE DAMAGE TO THE MANUAL DRIVE INPUT.
(1)
Manually drive each of 16 latch actuators to fully unlatch the pins (approximately 150 turns from the fully latch to unlatched position) and make sure the torque is not more than 20 pound-inches.
S 982-007
(2)
Manually drive the push-pull cam actuator to move the cam to the fully open position.
NOTE: Approximately 200 turns to fully open the cam from the fully
____
closed position.
S 982-008
CAUTION: MAKE SURE TO DRIVE THE TWO LINEAR ACTUATORS SIMULTANEOUSLY.
_______ THE UNEQUAL LOAD DISTRIBUTION CAN CAUSE DAMAGE TO THE LINEAR ACTUATORS.
(3) Simultaneously drive the two linear actuators with the alternate drive extension or the speed wrench in the open direction (counterclockwise) until the door is fully opened.
NOTE: The same air pressure supply and the hose diameter must be
____ used on the alternate drive extension or the speed wrench to make sure the rotational speed (RPM) is the same.
F. Close Nose Cargo Door
S 862-035
(1)
If the drive system can operate, make sure these circuit breakers are open:
(a)
On the Auxiliary External 2 Power Center - Right panel P715: 1) NOSE CARGO DOOR (115V AC)
(b)
On the Power Distribution Center - Right panel P415: 1) NOSE CARGO DOOR CONT (28V DC)
S 012-017
(2) If connected, disconnect the flexible drive shafts at the linear actuators.
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
52-31-00
ALL ú ú 02 Page 207 ú Feb 18/01
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400 MAINTENANCE MANUAL
S 982-009
CAUTION: MAKE SURE TO DRIVE THE TWO LINEAR ACTUATORS SIMULTANEOUSLY.
_______ THE UNEQUAL LOAD DISTRIBUTION CAN CAUSE DAMAGE TO THE LINEAR ACTUATORS.
(3) Simultaneously drive the two linear actuators with the alternate drive extension or the speed wrench in the closed direction (clockwise) until the push-pull cam touches the cam rollers.
NOTE: The same air pressure supply and hose diameter must be
____ used on the alternate drive extension or the speed wrench to make sure the rotational speeds (RPM) are the same.
S 832-025
(4) Rig and lock the door as follows:
NOTE: It is necessary for the drive system to be operational
____ if you follow these steps. Do the subsequent sub-task if the drive system is not operational.
(a)
Remove the DO-NOT-CLOSE tags and close these circuit breakers: 1) On the Auxilary External 2 Power Center-Right panel P715: a) NOSE CARGO DOOR (115V AC) 2) On the Power Distribution Center-Right panel P415: a) NOSE CARGO DOOR CONT (28V DC)
3) On the Nose Cargo Door Power panel H122: a) LATCHES 1-4 LEFT b) LATCHES 1-4 RIGHT c) LATCHES 5-8 LEFT d) LATCHES 5-8 RIGHT e) PULL UP CAM f) DOOR LIFT 中國航空網 m.k6050.com 航空翻譯 www.aviation.cn 本文鏈接地址：747-400 AMM 飛機維護手冊 艙門 DOORS 2(4)
