34-11-03
ALL ú ú 06 Page 402 ú Oct 10/93
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
C84073
A
747-400
MAINTENANCE MANUAL
(c)
Remove the electrical connector from the rear of the valve.
(d)
Install a dust cap on the electrical connector.
(e)
Remove the screws that hold the valve to the floor beam.
(f)
Remove the valve from the floor beam.
TASK 34-11-03-404-032
3. Source Select Valve Installation (Fig. 401)
________________________________
A. References
(1)
AMM 24-22-00/201, Manual Control
(2)
AMM 31-61-00/201, Integrated Display System
(3)
AMM 34-11-00/501, Pitot-Static System
(4)
IPC 34-11-03 Fig. 1
B. Access
(1)
Location Zones 117 Electrical and Electronics Compartment, LH 222 Control Cabin, RH
(2)
Access Panel
117AL Electronics Compartment Access Door
C. Install the Source Select Valve
S 864-033
(1) Open this circuit breaker and attach a DO-NOT-CLOSE tag:
(a) P7 Overhead Circuit Breaker Panel 1) 7J17 ADC C P/S XFR VALVE
S 424-014
(2) Install the source select valve:
(a)
Install the valve onto the floor beam that holds the valve.
(b)
Install the screws in the valve.
(c)
Remove the dust cap from the electrical connector.
(d)
Examine the electrical connector for loose, bent, or broken pins.
(e)
Install the electrical connector to the rear of the valve.
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
34-11-03
ALL ú ú 01 Page 403 ú Feb 10/94
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400 MAINTENANCE MANUAL
(f) Remove the dust caps from the pitot-static system hoses.
CAUTION: DO NOT CONNECT THE PITOT-STATIC SYSTEM HOSES WHEN THE
_______ PITOT-STATIC SYSTEM IS NOT AT AMBIENT PRESSURE. YOU CAN CAUSE DAMAGE TO THE SOURCE SELECT VALVE.
(g)
Connect the three pitot-static system hoses to the valve.
(h)
Make sure the quick-disconnects are fully connected and locked in the sealed position.
D. Test the Source Select Valve
S 794-009
(1)
Do a leakage test of the pitot-static system (AMM 34-11-00/501).
S 864-034
(2)
Remove the DO-NOT-CLOSE tag and close this circuit breaker:
(a) P7 Overhead Circuit Breaker Panel
1) 7J17 ADC C P/S XFR VALVE
S 864-027
(3)
Supply electrical power (AMM 24-22-00/201).
S 864-015
(4)
Make sure these circuit breakers are closed:
(a) P7 Overhead Circuit Breaker Panel
1) 7J19 ADC SOURCE SEL CAPT
2) 7J20 ADC SOURCE SEL F/O
S 864-036
(5) Open this circuit breaker and attach a DO-NOT-CLOSE tag:
(a) P7 Overhead Circuit Breaker Panel
1) 7J17 ADC C P/S XFR VALVE
S 864-037
(6)
Set the AIR DATA switch on the first officer's source select module to the C position.
S 754-038
(7)
Make sure the EICAS status message, P/S XFR VLV, shows on the auxiliary display.
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
34-11-03
ALL ú ú 01 Page 404 ú Jun 10/94
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400 MAINTENANCE MANUAL
(8) S 864-040Remove the DO-NOT-CLOSE tag and close this circuit breaker: (a) P7 Overhead Circuit Breaker Panel 1) 7J17 ADC C P/S XFR VALVE
(9) S 754-041Make sure the EICAS status message, P/S XFR VLV, does not show on the auxiliary display.
S 864-012
(10) Remove electrical power if it is not necessary (AMM 24-22-00/201). 中國航空網(wǎng) m.k6050.com 航空翻譯 www.aviation.cn 本文鏈接地址：747-400 AMM 飛機(jī)維護(hù)手冊 導(dǎo)航 NAVIGATION 1(81)
