P.O. Box 2426, OR other suitable instrument
B. References
(1)
34-11-01/401, Pitot-Static Probe
(2)
34-11-01/701, Pitot-Static Probe
C. Access
(1) Location Zones
113 Nose Gear Well, LH
114 Nose Gear Well, RH
211 Passenger Cabin Nose to First Door, LH
212 Passenger Cabin Nose to First Door, RH
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
34-11-01
ALL ú ú 01 Page 601 ú Feb 10/97
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400 MAINTENANCE MANUAL
D. Procedure
S 866-002
(1) Open the applicable circuit breakers and attach DO-NOT-CLOSE tags:
(a) P6 Main Power Distribution Panel
1) 6D30 PROBE HEAT PITOT L
2) 6D31 PROBE HEAT PITOT R
3) 6D32 PROBE HEAT AUX PITOT L
4) 6D33 PROBE HEAT AUX PITOT R
S 026-016
(2) Remove the pitot-static probe (AMM 34-11-01/401).
S 216-003
WARNING:_______MAKE SURE THE PROBE HEAT IS NOT ON. THIS CAN CAUSE INJURY TO PERSONS.
(3)
Visually examine the pitot-static probe for damage.
S 216-012
(4)
Visually examine the pitot-static probe for material in the static ports, pitot opening, and pitot drain hole.
S 216-013
CAUTION: DO NOT PUT OBJECTS INTO THE PITOT OPENING, STATIC PORTS OR
_______ DRAIN HOLE. THIS CAN CAUSE DAMAGE TO THE PITOT-STATIC PROBE.
(5) Visually examine the aerodynamic condition of the static ports (Fig. 601):
(a)
Make sure that the static port edges are perpendicular to the contoured-surface.
(b)
Make sure that the static port edges are not rounded by more than 0.003 inches.
(c)
Make sure that the static port edges are not above the contoured-surface more than 0.003 inches.
S 216-007
(6) Visually examine the pitot-static probe for nicks, scratches, or other surface defects:
(a)
Make sure the depth of the defect is less than 0.015 inches in an area 0.5 inches around the ports.
(b)
Make sure that the depth of the defect is less than 0.025 inches on the remaining head section.
(c)
Make sure that the depth of the defect is less than 0.125 inches on the strut section.
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
34-11-01
ALL ú ú 01 Page 602 ú Oct 10/96
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400
MAINTENANCE MANUAL
SQUARE EDGE ROUNDED EDGE
FLARED AND
RAISED EDGE DAMAGED
CORRECT
DAMAGED
Inspection Criteria for Static Ports
Figure 601
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
34-11-01
ALL ú ú 01 Page 603 ú Oct 10/93
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400
MAINTENANCE MANUAL
20` (REF)
Lip Flatness
Figure 602
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
34-11-01
ALL ú ú 01 Page 604 ú Oct 10/93
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
C77348
A
747-400 MAINTENANCE MANUAL
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：747-400 AMM 飛機維護手冊 導航 NAVIGATION 1(75)
