S 216-009
(9)
Visually examine the pitot tip for an inward dent (Fig. 604):
(a)
Make sure that the dent is less than 0.030 inches from the usual tip diameter.
(b)
Make sure that the dent does not include more than 20 percent of the tip circumference.
S 216-010
(10) Visually examine the pitot tip for nicks (Fig. 605):
(a)
Make sure the depth of a nick is less than 0.035 inches when the pitot tip contains only one nick.
(b)
Make sure the depth of each nick is less than 0.025 inches when the pitot tip contains two nicks.
S 216-015
(11)
Replace the pitot-static probe if the damage is more than permitted limits (Ref 34-11-01/401).
S 426-021
(12)
Reinstall the pitot-static probe if it is in tolerance.
S 866-006
(13)
Remove the DO-NOT-CLOSE tags and close the applicable circuit breaker:
(a) P6 Main Power Distribution Panel
1) 6D30 PROBE HEAT PITOT L
2) 6D31 PROBE HEAT PITOT R
3) 6D32 PROBE HEAT AUX PITOT L
4) 6D33 PROBE HEAT AUX PITOT R
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
34-11-01
ALL ú ú 01 Page 605 ú Oct 10/97
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400
MAINTENANCE MANUAL
Outward Flare of Lip
Figure 603
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
34-11-01
ALL ú ú 01 Page 606 ú Oct 10/93
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400
MAINTENANCE MANUAL
REJECTION CRITERION:
1. INDENTATION EXCEEDING 0.030 IN.
Indentation of Pitpt Opening
Figure 604
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
34-11-01
ALL ú ú 01 Page 607 ú Oct 10/93
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
C77369
A
747-400
MAINTENANCE MANUAL
Chips or Nicks In Probe Tip
Figure 605
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
34-11-01
ALL ú ú 01 Page 608 ú Oct 10/93
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400 MAINTENANCE MANUAL
PITOT-STATIC PROBE - CLEANING/PAINTING
______________________________________
1. General_______
A. This subject has two tasks. The first task is to clean the material collected in the pitot opening, static ports, and drain hole of the probe. The second task is to clean the external surface of the pitot-static probe.
B. The pitot-static probe should not be painted. The data from the pitot-static probe can be affected if you paint the pitot-static probe.
TASK 34-11-01-167-024
2. Internal Cleaning of the Pitot-Static Probe___________________________________________
A. Standard Tools and Equipment
(1)
0.029 inch drill rod
(2)
0.033 inch drill rod
(3)
Dry air pressure source.
B. References
(1)
34-11-01/401, Pitot-Static Probe
(2)
34-11-01/601, Pitot-Static Probe
C. Access
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：747-400 AMM 飛機維護手冊 導航 NAVIGATION 1(76)
