34-12-00
 ALL  ú ú 06 Page 510 ú Oct 10/94
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400 MAINTENANCE MANUAL
 S 825-548
 (15) Move the left AOA vane to -10 degrees with the angular displacement measuring tool.
 (a) Make sure the AOA on the bus reader is -10.36 to -9.64 degrees
 S 975-361
 (16)
 Make a record of the No. 2 left AOA vane value.

 S 865-E15

 (17)
 Close the 7A12 AOA L circuit breaker on the P7 panel.

 S 085-008

 (18)
 Disconnect the ARINC 429 bus reader from the L ADC front panel TEST ONLY connector.

 S 485-363

 (19)
 Install an angular displacement measuring tool on the right AOA vane.

 S 825-549

 (20)
 Move the right AOA vane to 0 degrees with the angular displacement measuring tool.

 S 485-365

 (21)
 Connect the ARINC 429 bus reader to the R ADC front panel TEST ONLY connector.

 S 865-336

 (22)
 Set the ARINC 429 bus reader to these parameters:

 Octal Label: 221
 SDI: 2 (Bit 10 = 1, Bit 9 = 0)
 Display: Engineering Units

 (a) Make sure the AOA on the bus reader is -0.36 to 0.36 degrees.
 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 34-12-00
 ALL  ú ú 12 Page 511 ú Oct 10/94
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400
MAINTENANCE MANUAL

 S 825-550
 (23) Move the right AOA vane to 10 degrees with the angular displacement measuring tool.
 (a)  Make sure the AOA on the bus reader is 9.64 to 10.36 degrees.
 S 825-551
 (24) Move the right AOA vane to -10 degrees with the angular displacement measuring tool.
 (a)  Make sure the AOA on the bus reader is -10.36 to -9.64 degrees
 S 975-366
 (25)
 Make a record of the No. 2 right AOA vane value.

 S 975-552

 (26)
 Make sure the No. 2 right AOA vane value is within 0.54 degrees of the No. 1 left AOA vane value.

 S 975-553

 (27)
 Make sure the No. 2 right AOA vane value is within 0.54 degrees of the No. 2 left AOA vane value.

 S 865-E18

 (28)
 Set the ARINC 429 bus reader to these parameters:

 Octal Label: 350
 SDI: 2 (Bit 10 = 1, Bit 9 = 0)
 Display: Binary

 (a)  Make sure bits 11 and 12 of label 350 are in the zero state.
 S 865-554
 (29) Open the 7A16 AOA R circuit breaker on the P7 panel.
 (a)  Make sure bit 11 of label 350 is in the zero state and bit 12 is in the one state.
 S 865-555
 (30)
 Open the 7A17 AOA ALTN R circuit breaker on the P7 panel.

 (a)  Make sure bit 11 of label 350 is in the one state.

 (31)
 Close the 7A17 ALTN AOA R circuit breaker on the P7 panel.

 S 825-556

 (32)
 Move the right AOA vane to 0 degrees with the angular displacement measuring tool.

 S 865-372
 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 34-12-00
 ALL  ú ú 07 Page 512 ú Oct 10/94
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400 MAINTENANCE MANUAL
 S 865-374
 (33) Set the ARINC 429 bus reader to these parameters:
 Octal Label: 221
 SDI: 2 (Bit 10 = 1, Bit 9 = 0)
 Display: Engineering Units

 (a) Make sure the AOA on the bus reader is -0.36 to 0.36 degrees.
 S 825-557
 (34) Move the right AOA vane to 10 degrees with the angular displacement measuring tool.
 (a) Make sure the AOA on the bus reader is 9.64 to 10.36 degrees
　
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：747-400 AMM 飛機維護手冊 導航 NAVIGATION 1(100)