曝光臺 注意防騙 網曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

 (8)  S 024-057Do these steps to remove the upper rudder from the airplane.
 WARNING:_______ PERSONS MUST HOLD THE RUDDER TO KEEP IT STABLE. THE RUDDER CAN TRY TO TURN OR MOVE WHEN YOU DISCONNECT THE HINGES. THE RUDDER CAN CAUSE INJURY TO PERSONS OR DAMAGE TO EQUIPMENT IF IT MOVES.
 (a) (b)  Remove the lockbolt (59) and the cotter pin (56) from hinges No. 7 and 8.Remove the nuts (55, 60) on hinges No. 7 and 8.

 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 27-21-01
 ALL  ú ú 01 Page 427 ú Jun 18/99
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400 MAINTENANCE MANUAL
 (c)  
Loosen the threaded bushings (52) in hinges No. 7 and 8 until their ends are fully retracted.

 (d)  
Remove the hinge pins (48, 49, 64, 65) at hinges No. 7 and No. 8.

 (e)  
Remove the nut (44) at hinge No. 6.

 (f)  
Remove the bolt (38) at hinge No. 6.

 (g)  
Remove the nuts (3) at hinges No. 5, 9, 10, and 11.

 (h)  
Remove the bolts (1) at hinges No.5, 9, 10, and 11.

 (i)  
Do these steps to carefully move the rudder away from the vertical fin:

 NOTE: Persons must hold the rudder with their hands to help
____ the crane move the rudder.
 1)  Move the rudder to the rear, 6 inches at a time.
 2)  Make sure the rudder does not hit the trailing edge of the vertical fin.
 3)  Move the rudder back until it is clear of the airplane.
 (j)  
Release the lock on the sling and manually turn the rudder until the hinges point up.

 (k)  
Lock the sling.

 (l)  
Do these steps to put the rudder on the ground: 1) Put the trailing edge of the rudder on a soft material. 2) Put the rudder on its side.

 TASK 27-21-01-404-135
 5.  Upper Rudder Installation (Fig. 404)_________________________
 A.  Special Tools and Equipment
 (1)  
2MIT65B04011-41 Nose Gear Rig and Tow Safety Pin

 (2)  
ST2580-267 Spanner Wrench Adapter Set

 (3)  
G27012-44 Sling Assembly, Upper Rudder

 B.  
Standard Tools and Equipment

 (1)  
Crane

 (2)  
Load Positioner (For 850 Pounds minimum), 3734T51, McMaster-Carr

 P.O. Box 54960, Los Angeles, California 90054 (We recomend this tool, but it is optional)
 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 27-21-01
 ALL  ú ú 01 Page 428 ú Oct 18/99
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400
MAINTENANCE MANUAL

 (3)
Bonding Meter

 (4)
Feeler Gauge

 C.
Consumable Materials

 (1)
D00633 Grease - BMS 3-33 (Preffered).

 (2)
D00013 Grease - MIL-G-23827 (Optional).

 (3)
A00181 Adhesive - BMS 5-92

 (4)
A00247 Sealant - BMS 5-95

 D.
Parts ~.............................................................................. | MM | | IPC | ................. ............................ | FIG | ITEM | NOMENCLATURE | SUBJECT | FIG | ITEM | ................................................................................ | 404 | 1 | Bolt | 27-21-01 | 2 | 35,40 | | | 2 | Washer | | | 50 | | | 3 | Nut | | | 55 | | | 4 | Washer | | | 45 | | | 5 | Bushing | | | 60 | | | 6 | Lockwasher | 55-40-52 | 1 | 95 | | | 8 | Bushing | 27-21-15 | 2 | 390 | | | 9 | Bolt | | | 370 | | | 10 | Washer | | | 375 | | | 11 | Rudder-Upper | 27-21-01 | 2 | 195 | | | 12 | Washer | 27-21-15 | 2 | 380 | | | 13 | Nut | | | 385 | | | 16 | Bolt | | | 210 | | | 17 | Cap | | | 160 | | | 18 | Capscrew | | | 150 | | | 19 | Washer | | | 155 | | | 20 | Housing-Assy | | | 175 | | | 22 | Bushing | | | 180 | | | 23 | Washer | | | 195 | | | 24 | Bolt-Assy | | | 185 | | | 25 | Nut | | | 200 | | | 27 | Lever Assy.-Summing | | | 240 | | | 28 | Washer | | | 215 | | | 29 | Bushing | | | 235 | | | 30 | Bolt | | | 213 | | | 31 | Washer | | | 215 | | | 32 | Washer | | | 225 | | | 33 | Collar | | | 230 | | | 34 | Bolt | 27-28-01 | 1 | 75 | 2......…........…...................................…...........….....…........1
　
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：747-400 AMM 飛機維護手冊 飛行操縱 FLIGHT CONTROLS 2(73)