曝光臺 注意防騙 網曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

A
747-400 MAINTENANCE MANUAL
 S 095-006
 (4)  
Do this task: "Install the Rigging Pins in the Steering System" (AMM 32-50-00/201).

 S 865-007

 (5)  
Turn the rudder trim knob on the P8 panel until the rudders are at neutral position.

 S 865-008

 (6)  
Make sure the pointers on the surface position display of the EICAS status page are approximately at the mid-scale mark.

 S 715-009

 (7)  
Do an operational check of the rudder position indicating system:

 (a)  
Push the left rudder pedal full forward.

 (b)  
Make sure the pointers move to the left end mark of the scale.

 (c)  
Push the right rudder pedal full forward.

 (d)  
Make sure the pointers move to the right end mark of the scale.

 (e)  
Release the rudder pedals.

 (f)  
Make sure the pointers move approximately to the mid-scale mark.

 S 865-010
 (8)  
If the hydraulic power is not necessary, do this task: "Remove Hydraulic Power" (AMM 29-11-00/201).

 S 495-011

 (9)  
Do this task: "Remove the Rigging Pins from the Steering System" (AMM 32-50-00/201).

 S 865-012

 (10)
 If the electrical power is not necessary, do this task:  "Remove Electrical Power" (AMM 24-22-00/201).

　
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：747-400 AMM 飛機維護手冊 飛行操縱 FLIGHT CONTROLS 2(167)