(a)  As an alternative, you can make sure the tank(s) have a known quantity of fuel that is less than 88 % of the full capacity of the tank.

 (3)  
Supply a pressure fueling source (Ref 12-11-00/301).

 (a)  Do not connect the fueling source to the fueling receptacle.
 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 28-21-00
 ALL  ú ú 01 Page 101 ú Jul 15/96
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A 
737-300/400/500MAINTENANCE MANUAL
 (b)  The fueling truck or hydrant must have a precise flowmeter to
 measure the fuel you put into the tanks.
 (4)  Connect the external electrical power (Ref 24-22-00/201).
 (5)  Make sure these circuit breakers are closed:
 (a)  On the main power distribution panel, P6:
 1)  EP GND FUELING
 2)  FUELING AND EXT PWR CONT

 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 28-21-00
 ALL  ú ú 02 Page 102 ú Nov 15/92
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A 737-300/400/500MAINTENANCE MANUAL
Do this procedure: "Prepare for Troubleshooting". Open the access door for the
refuel station. Make sure the door stays fully open. Make sure the floodlights
come on. Make sure the refuel quantity indicators show the fuel quantity. IF -

Push all the covers for the fueling valve lights to make sure the lights come on (the lights are press-to-test). Make sure all the light bulbs come on in correct sequence. IF -

Set the switches for the fueling shutoff valve to the CLOSE position. Attach the fueling source nozzle to the receptacle at the refuel station. Set the switches for the fueling shutoff valve to the OPEN position. Start the refuel operation. Monitor the refuel indicator for each tank to make sure the fuel quantity increases smoothly. This shows that the fuel goes into the tank correctly. IF -

EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 28-21-00
 ALL  ú
 ú  03  Page 103
 ú  Nov 15/92 

BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A 737-300/400/500MAINTENANCE MANUAL

Set the switches for the fueling shutoff valve to the OPEN position. Start the refuel operation again. Permit the refuel operation to continue until the valve position lights go off and the refuel operation stops. Make sure the refuel quantity indicators show the full tank readings. IF -

EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 28-21-00
 ALL  ú
 ú  02  Page 104
 ú  Nov 15/92 

BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A 737-300/400/500MAINTENANCE MANUAL
PROCEDURE 1

EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 28-21-00
 ALL  ú ú 02 Page 105 ú Nov 15/92
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A 737-300/400/500MAINTENANCE MANUAL
PROCEDURE 2

NOTE:Refer to the Wiring Diagram Manual (WDM) for wiring details. PROCEDURE 3

NOTE:Refer to the Wiring Diagram Manual (WDM) for wiring details.

EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 28-21-00
 ALL  ú
 ú  02  Page 106
　
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：737-300 400 500 AMM 飛機維護手冊 燃油 FUEL 2(34)