R **ON A/C 106-149, 229-299, 303-399, 401-499,

 TASK 36-11-00-810-951 Spurious APU leak indication on the Engine 1
 1. Possible Causes
_______________
 -BMC-1 (1HA1)
 -P/BSW-AIR COND/APU BLEED (5HV)
 -wiring
 2. Job Set-up Information
______________________
 A. Referenced Information
 -------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
AMM 36-11-00-740-001 BITE Test of the BMC 1(2)
 AMM 36-11-34-000-001 Removal of the BMC (1HA1, 1HA2)
 AMM 36-11-34-400-001 Installation of the BMC (1HA1, 1HA2)
 ASM 36-12/01

 3. Fault Confirmation

__________________
 A. Test
 (1) Do the BITE test of the BMC1 (Ref. AMM TASK 36-11-00-740-001).
 4. Fault Isolation
_______________
 A. If the BITE test gives the maintenance message:
 BMC1 OR APU FAULT IND 7HV

 NOTE : If the maintenance message BMC1 OR APU FAULT IND 7HV comes into
____ view with no associated ECAM warning, no trouble shooting procedure is necessary.
 -Replace the BMC-1 (1HA1) (Ref. AMM TASK 36-11-34-000-001) and (Ref. AMM TASK 36-11-34-400-001).
 (1) If the fault continues:
 -Replace the P/BSW-AIR COND/APU BLEED (5HV) (Ref. ASM 36-12/01).
 (a) If the fault continues:
 -Do a check and repair the wiring (Ref. ASM 36-12/01) between: . Pin A/B1 of the APU bleed pushbutton switch (5HV) and pin AA/14C of the BMC1 (1HA1) . Pin A/B3 and the ground.
 1
R -EFF : 106-149, 229-299, 303-399, 401-499,

-∞∞36-11-00∞∞∞∞∞∞∞∞∞∞Page B231

 --Aug 01/05 ---CES -

 B. Do the test given in para. 3.

 1

R -EFF : 106-149, 229-299, 303-399, 401-499,

-∞∞36-11-00∞∞∞∞∞∞∞∞∞∞Page B232
 --Aug 01/05 ---CES - Spurious APU leak indication on the Engine 2

 1. Possible Causes
_______________
 -BMC-2 (1HA2)
 -P/BSW-AIR COND/APU BLEED (5HV)
 -wiring
 2. Job Set-up Information
______________________
 A. Referenced Information
 -------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
AMM 36-11-00-740-001 BITE Test of the BMC 1(2)
 AMM 36-11-34-000-001 Removal of the BMC (1HA1, 1HA2)
 AMM 36-11-34-400-001 Installation of the BMC (1HA1, 1HA2)
 ASM 36-12/01

 3. Fault Confirmation

__________________
 A. Test
 (1) Do the BITE test of the BMC2 (Ref. AMM TASK 36-11-00-740-001).
 4. Fault Isolation
_______________
 A. If the BITE test gives the maintenance message:
 BMC2 OR APU FAULT IND 7HV

 NOTE : If the maintenance message BMC2 OR APU FAULT IND 7HV comes into
____ view with no associated ECAM warning, no trouble shooting procedure is necessary.
 -Replace the BMC-2 (1HA2) (Ref. AMM TASK 36-11-34-000-001) and (Ref. AMM TASK 36-11-34-400-001).
 (1) If the fault continues:
 -Replace the P/BSW-AIR COND/APU BLEED (5HV) (Ref. ASM 36-12/01).
 (a) If the fault continues:
 -Do a check and repair the wiring (Ref. ASM 36-12/01) between: . Pin A/B1 of the APU bleed pushbutton switch (5HV) and pin AA/14C of the BMC2 (1HA2) . Pin A/B3 and the ground.
 B. Do the test given in para. 3.
 1
R -EFF : 106-149, 229-299, 303-399, 401-499,

-∞∞36-11-00∞∞∞∞∞∞∞∞∞∞Page B233
 --Aug 01/05 ---CES - Drift of the Engine 1 Bleed Regulated Pressure Transducer

 1. Possible Causes
_______________
 -XDCR-BLEED REGULATED PRESS, ENG 1 (8HA1)
 -BMC-1 (1HA1)
 -wiring
 -C/B-AIR BLEED/ENG 1/MONG
 2. Job Set-up Information
______________________
 A. Referenced Information
 -------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
AMM 36-11-15-000-001 Removal of the Bleed Transferred Pressure Transducer (7HA1,7HA2) AMM 36-11-15-400-001 Installation of the Bleed Transferred Pressure
 Transducer (7HA1,7HA2) AMM 36-11-34-000-001 Removal of the BMC (1HA1, 1HA2) AMM 36-11-34-400-001 Installation of the BMC (1HA1, 1HA2) ASM 36-11/01
 3. Fault Confirmation
　
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320 Trouble Shooting Manual 排故手冊 PNEUMATIC(96)