-∞∞36-11-00∞∞∞∞∞∞∞∞∞∞Page 205
--Aug 01/05 ---CES -
R R R * - replace the SENSOR-EXCHANGER OUT TEMP, ENG 1 (6HA1) (Ref. AMM TASK 36-11-17-000-001) and (Ref. AMM TASK 36-11-17-400-001).
R **ON A/C ALL
B. Test
(1) Do the engine start procedure (Ref. AMM TASK 71-00-00-710-003).
(2) Make sure that the ECAM warning AIR ENG 1 BLEED FAULT is not shown on the upper ECAM DU.
(3) Make sure that the bleed temperature is between 150 deg. and 200 deg..
1 -EFF : ALL
-∞∞36-11-00∞∞∞∞∞∞∞∞∞∞Page 206
--Feb 01/05 ---CES - Loss of the BMC2
1. Possible Causes
_______________
-BMC-2 (1HA2)
2. Job Set-up Information
______________________
A. Referenced Information
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
AMM 36-11-00-740-001 BITE Test of the BMC 1(2)
AMM 36-11-34-000-001 Removal of the BMC (1HA1, 1HA2)
AMM 36-11-34-400-001 Installation of the BMC (1HA1, 1HA2)
3. Fault Confirmation
__________________
A. Test
(1) Do the BITE test of the BMC2 (Ref. AMM TASK 36-11-00-740-001).
4. Fault Isolation
_______________
A. If the test gives the maintenance message:
BMC2
-replace the BMC-2 (1HA2) (Ref. AMM TASK 36-11-34-000-001) and (Ref. AMM TASK 36-11-34-400-001).
B. Do the test given in para. 3.
1
-EFF : ALL
-∞∞36-11-00∞∞∞∞∞∞∞∞∞∞Page 207
--Feb 01/05R ---CES -
High Pressure Bleed Valve of the Engine 2 Blocked in the Open Position
1. Possible Causes
_______________
-VALVE-HP BLEED (4000HA)
2. Job Set-up Information
______________________
A. Referenced Information
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
AMM 36-11-51-000-042 Removal of the High Pressure Bleed Valve (4000HA) AMM 36-11-51-400-042 Installation of the High Pressure Bleed Valve (4000HA)
3. Fault Confirmation
__________________
A. Test
(1) Not applicable, the fault is evident.
4. Fault Isolation
_______________
A. If the fault symptom is identified by the maintenance message: HP BLEED-V 4000HA and if the bleed temperature indication is more than 255 deg.C plus or minus 5 deg.C:
-replace the VALVE-HP BLEED (4000HA) (Ref. AMM TASK 36-11-51-000-042) and (Ref. AMM TASK 36-11-51-400-042).
B. Test
(1)
Do the engine start procedure.
(2)
Make sure that the ECAM warning AIR ENG 2 BLEED FAULT is not shown on the upper ECAM DU.
1
-EFF : ALL
-∞∞36-11-00∞∞∞∞∞∞∞∞∞∞Page 208
--Feb 01/05R ---CES -
Fan Air Valve of the Engine 2 Blocked in the Closed Position
1. Possible Causes
_______________
-THERMOSTAT-FAN AIR VALVE CTL (7170HM2)
-VALVE-FAN AIR, ENG2 (9HA2)
-SENSOR-EXCHANGER OUT TEMP, ENG 2 (6HA2)
-filter of the thermostat (7170HM2)
-sense line
2. Job Set-up Information
______________________
A. Referenced Information
-------------------------------------------------------------------------------
REFERENCE DESIGNATION
-------------------------------------------------------------------------------
AMM 36-11-17-000-001 Removal of the Heat-Exchanger Outlet-Temperature Sensor 6HA1(6HA2) AMM 36-11-17-400-001 Installation of the Heat-Exchanger Outlet-Temperature Sensor 6HA1(6HA2) AMM 36-11-43-000-001 Removal of the Fan Air Valve Control Thermostat (7170HM1, 7170HM2) AMM 36-11-43-000-003 Removal of the Thermostat-Filter of the Fan Air
Valve-Control
R AMM 36-11-43-100-001 Remove the Thermostat-Filter of the Fan Air
R Valve-Control for Cleaning AMM 36-11-43-400-001 Installation of the Fan Air Valve Control Thermostat (7170HM1, 7170HM2) AMM 36-11-43-400-003 Installation of the Thermostat-Filter of the Fan Air Valve-Control AMM 36-11-54-000-001 Removal of the Fan Air Valve (9HA1,9HA2) AMM 36-11-54-400-001 Installation of the Fan Air Valve (9HA1,9HA2) AMM 36-11-54-720-001 Functional Test of the Opening of the Fan Air Valve AMM 71-00-00-710-003 Engine Automatic Start
中國(guó)航空網(wǎng) m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320 Trouble Shooting Manual 排故手冊(cè) PNEUMATIC(21)
