R End Caps - P/N Characteristics and Shrinking Tools R ABS0065 R Figure 005
20-42-13 Page 9
R B. NSA936603
R R (1) P/N identification NSA936603 CC 0100 | || | |------------ Max. permitted dia. in 1/10mm | || | | || |--------------- Min. permitted dia. in 1/10mm | || | ||------------------ Type code | | | |------------------- Cap | --------------------------- Standard P/N
(2) P/N characteristics
R (a) Temperature Minimum operating temperature is -55 deg.C (-67.00 deg.F). Maximum operating temperature is 110 deg.C (230.00 deg.F). Shrinkage temperature is 135 deg.C (275.00 deg.F).
(b) Color NSA936603 color is black.
R R R (3) Allocation table (Ref. Fig. 006) This table gives the size of the cap to use for the wire type and gauge.
R (4) Installation procedure (Ref. Fig. 006)
R (a) Wire stripping - Do not strip a wire before you install a sealing end cap. Only make a clean cut on the wire.
(b) Shrinking procedure - Install the end cap on the wire. - Heat shrink the end cap with the applicable tool.
20-42-13 Page 10
End Caps - P/N Characteristics and Shrinking Tools NSA936603 R Figure 006
20-42-13 Page 11
_______________________________________________
SHIELD TERMINATIONS - DESCRIPTION AND OPERATION
_______
1. General
This chapter gives the description, installation and identification of the sleeves and ferrules used on aircraft:
A. Solder Sleeves (20-42-21) The solder sleeves used for shield termination have the following codes: ABS0237 E0160 NSA937790
B. Crimp Sleeves and Ferrules (20-42-22) The crimp sleeves and ferrules used for shield termination have the following codes: NSA937503 NSA937504 NSA937505
20-42-20 Page 1
__________________________________________
SOLDER SLEEVES - DESCRIPTION AND OPERATION
_______
1.
General Solder sleeves installed on the aircraft have the codes that follow : ABS0237 E0160 NSA937790
__________________________________
2.
Identification and Characteristics
A. ABS0237
(1)
Characteristics
(a)
P/N identification
|----------------------------------- Standard P/N
(b)
Temperature Maximum operating temperature is 200 deg.C (392.00 deg.F).
(2)
Installation
(a)
Wire stripping Refer to Method E Procedure.
(b)
Shrinking tools (Ref. Fig. 001)
(c)
Procedure Refer to Method E Procedure
ABS0237 - 02
| |-------------------------- Item code
|
20-42-21 Page 1
Apr 01/05
R
R Solder Sleeves - P/N Characteristics and Shrinking Tools ABS0237 Figure 001
20-42-21 Page 220-42-21 Page 3
R B. E0160
R (1) Characteristics
R (a) P/N identification
R E0160 - 1 - 1 H
R | | | |-------------------------- Color code (H = clear blue)
R | | |------------------------------ Size code
R | |---------------------------------- Climatic code : 1 = 150.C to 200.C
R |---------------------------------------- Standard P/N
R (b) Temperature
R Minimum operating temperature is 150 deg.C (302.00 deg.F).
R Maximum operating temperature is 200 deg.C (392.00 deg.F).
R (2) Installation
R (a) Wire stripping
R (Ref. Fig. 002)
R Refer to Method A, B, C, D, E, F or G Procedure depending on the
R Installation Method allocation table
R (b) Shrinking tools
R (Ref. Fig. 003)
R (c) Procedure
R (Ref. Fig. 002)
R Refer to Method A, B, C, D, E, F or G Procedure to agree with the
R Installation Method allocation table
R Solder Sleeves - Installation Method Allocation Table E0160 Figure 002
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320 ESPM Electrical Standard Practices Manual 2(91)
