20-33-45 Page 2220-33-45 Page 23

R  (b) For ABS0327 and ABS0581 
R  -------------------------------------------------
R  | CONDUIT | ADAPTOR SIZE CODE | CONDUIT | 
R  | SIZE |-------------------------| TYPE | 
R  | CODE | ABS0327 | ABS0581 | CODE | 
R  |---------|------------|------------|-----------| 
R  | 06 | 08, 10 | 08, 10, 12 | | 
R  |---------|-------------------------| | 
R  | 09 | 08, 10, 12, 14 | | 
R  |---------|-------------------------| | 
R  | 10 | 12, 14 | | 
R  |---------|-------------------------| | 
R  | 12 | 14, 16, 18,| 12, 14, 16 | A, B, V | 
R  | | 20, 22 | 18, 20, 22 | and W* | 
R  |---------|------------|------------| | 
R  | 14 | 18, 20 | 18, 20, 22 | | 
R  |---------|------------------------ | | 
R  | 20 | 18, 20, 22, 24 | | 
R  |---------|-------------------------| | 
R  | 32 | -| 24 | | 
R  -------------------------------------------------
R  * For ABS0327 only 
R  (3) Conduit Type Code 
R  (a) For ABS0327 and ABS0581 
R  ---------------------------------------------------------
R  | CONDUIT TYPE CODE | | 
R  |---------------------------| CONDUIT P/N | 
R  | FOR ADAPTOR | FOR CRIMP | | 
R  | | SLEEVE | | 
R  |-------------|-------------|---------------------------| 
R  | A | A | E0432 and NSA935805 | 
R  |-------------|-------------|---------------------------| 
R  | B | B | NSA935805T | 
R  |-------------|-------------|---------------------------| 
R  | | V | ABS0330 | 
R  | V |-------------|---------------------------| 
R  | | VW | ABS0330, ABS0510, ABS0511 | 
R  |-------------|-------------|---------------------------| 
R  | W* | W | ABS0492 | 
R  ---------------------------------------------------------
R  * For ABS0327 only

 C. Installation procedure
R Refer to chapter: Metallic conduit - 20-33-32.

20-33-45 Page 2420-33-45 Page 25

R  ____________________________________________6. End Piece and Conduit Fitting at Conduit End
 This type of end piece and conduit fitting has for example the codes that
 follow:
 - ABS0513
 - ABS0519
 ABS0582
 ABS0584 (ex ABS0334) 
R  ABS1023
 A. ABS0513
 (Ref. Fig. 013)
 For shielded conduits fastened directly on the structure by a screw nut
 device, only the locking nut is secured by lockwire.
 (1) P/N identification
 ABS0513 -06 C
 | | |
 | | ------------------- Material code : C = stainless steel
 | | No code = aluminum
 | | 
R  | ------------------------ Size code
 |
 |
 -------------------------------- Standard P/N
 (2) P/N characteristics
 (a) Temperature
 Minimum operating temperature is -55 deg.C (-67.00 deg.F)
 (stainless steel and aluminum)
 Maximum operating temperature is 250 deg.C (482.00 deg.F)
 (stainless steel)
 Maximum operating temperature is 100 deg.C (212.00 deg.F)
 (aluminum) 
R  (b) Size code 
R  (Ref. Fig. 013) 
R  ----------------------------------------------------------------------------
R  | SIZE CODE | 06 | 09 | 10 | 12 | 14 | 16 | 20 | 24 | 32 | 40 | 
R  |--------------|-----|-----|-----|-----|-----|-----|-----|-----|-----|-----| 
R  | DIAMETER "A" | | | | | | | | | | | 
R  | (mm) | 9,90|11,50| 13 |14,60|16,20|17,80| 21 |24,10|30,50|36,80| 
R  |--------------|-----|-----|-----|-----|-----|-----|-----|-----|-----|-----| 
R  | LENGTH "B" | | | | | | | | | | | 
R  | (mm) | 4,50| 6,50| 7,50| 8,50| 9,50| 10 |13,50|15,50|20,50|25,50| 
R  ----------------------------------------------------------------------------

R Backshell, End Piece and Conduit Fitting - P/N Characteristics and Installation R ABS0513 and ABS0519
 Figure 013

20-33-45 Page 26

 (3) Installation procedure
 -
Install the backshell on the wires before you connect them to the connector.

 -
Install the nut, tighten and safety.
　
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320 ESPM Electrical Standard Practices Manual 2(85)