R Overbraided Conduit - Conduit End Assembly R ABS1353-003 and ABS5315
Figure 008
20-33-32 Page 1620-33-32 Page 17
R (d) Tighten the clamp with tool GLENAIR 600-058 or equivalent.
R - Wind spirals of self-welding tape in each direction, with a 51%
R overlap.
R - At the end of the spirals, install overlaps of tape (step 4).
R (2) Crimping end attachment with ABS5334 self-welding tape, external
R protection (case A)
R (Ref. Fig. 009)
R (3) Crimping end attachment with ABS0890, EN6049-006 or 007 external
R protection (case B)
R (Ref. Fig. 009)
R (4) Crimping end attachment without external protection (case C)
R (Ref. Fig. 009)
R (5) Crimping protection
R (Ref. Fig. 009)
R When metallic clamping strip is used, it is necessary to protect the
R harness from the cutting edge with 5 layers of self-welding tape
R ABS5334.
C. Spare conduits and spare wires
R (Ref. Fig. 010)
R (1) To let more cables go through modification and maintenance
R operations, a spare convoluted-type conduit (PTFE or equivalent) can
R be related to the harness.
R (2) Sometimes, provisions must be made for more spare wires inside the
R protection.
R
R - The number of spare wires (of the same gauge as the functional
R wires) must be at least 20% of the number of functional wires in
the harness.
R - The spare wires must be identified with a sleeve that as a "spare
R wire" label and an insulating end cap NSA936601 at each end. Inside
R a bundle protection, the end cap must be wrapped with teflon tape
R ABS5330 to prevent chafing on the wire.
(3) Examples of installation:
R (Ref. Fig. 010)
Installation with:
- Backshell and connector
- End fitting
- Pressure seal
R Overbraided conduit - Crimping End Attachment with Backshell R ABS1353-003 and ABS5315 R Figure 009
20-33-32 Page 18
Overbraided Conduit - Spare Conduit and Cable ABS5315 R Figure 010
20-33-32 Page 1920-33-33 Page 1
R __________________________________________________MISCELLANEOUS CONDUITS - DESCRIPTION AND OPERATION
R _______1. General
R
This chapter gives the description and operation for flexible conduit. As a
general rule, flexible conduits are items used for mechanical protection
R with more flexibility (hinges), segregation (arc-tracking protection), but
R this depends on the type of flexible conduit and the areas. For more
R information refer to chapter: 20-33-30 (conduit selection paragraph).
R This family of conduit is flexible with a bend radius more important than
R convoluted conduit.
R The main flexible conduits installed on aircraft are divided in 2
R sub-families and have the codes that follow:
R
- Open (split) conduits:
ABS0596 - Split elastomer conduit
E0507 - Split textile conduit
EN6049-005 - Split textile conduit
EN6049-006 - Split textile conduit
R EN6049-007 - Split textile conduit
- Closed conduits:
ABS0125 - Fuel immersion conduit
E0389 - High temperature conduit
E0502 - High temperature conduit
E0559 - High temperature conduit
R EN6049-003 - Expandable conduit
R EN6049-004 - Expandable conduit
_____________________2. Split (open) conduit:
A. ABS0596 R (Ref. Fig. 001)
(1)
P/N identification
ABS0596 M 001 | | | | | ------- Size code | | | ------------ Type code: M = double channel section | S = split tube section | U = single channel section | ------------------- Standard P/N
(2)
P/N characteristics
(a) Material code This type of conduit is made of woven aramid weave and moulded in silicone elastomer.
(b) Size code M code --------------------------------------------------------------------------| Size | Dimension D | Dimension F | Supply lengh | | code | mm (in.) | mm (in.) | mm (in.) | |--------|-------------------|---------------------|---------------------| | 001 | 8 (0.3149) | 8 (0.3149) | 300 (11.8110) | |--------|-------------------|---------------------|---------------------| | 002 | 18 (0.7086) | 9 (0.3543) | 300 (11.8110) | --------------------------------------------------------------------------
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320 ESPM Electrical Standard Practices Manual 2(61)
