F  『
 E  C F M  E
 E  E
 E  56-5B  E
 E  E

 CHAPTER 71
__________
 POWER PLANT
 TABLE OF CONTENTS
_________________
 SUBJECT_______ CH/SE/SU _ PAGE EFFECTIVITY________ C ____ ___________ Installation of the Turbine Rear A405 ALL Frame Drain Tube
 TUBES - OIL HYDRAULIC AND WATER DRAIN 71-73-49
 INSPECTION/CHECK 601 ALL Inspection of the Oil, Hydraulic 601 ALL and Water Drain Tubes/Hose
 TUBES - OIL HYDRAULIC AND WATER DRAIN 71-73-49
 CLEANING/PAINTING 701 ALL Cleaning of the Oil, Hydraulic, 701 ALL and Water Drain Tubes/Hose
 71-CONTENTS Page 10 Feb 01/05 R CES

 F  『
 E  C F M  E
 E  E

 E 56-5B E
 E E
 POWER PLANT - GENERAL - DESCRIPTION AND OPERATION

_________________________________________________
 1. General

_______ (Ref. Fig. 001) Each engine is housed in a nacelle suspended from a pylon attached to the wing lower surface. The nacelle is defined as being the set of cowling and system hardware which, fitted on the engine, constitutes a complete flightworthy propulsion system, ready for installation on the airplane. The nacelle consists of the demountable powerplant, the fan cowls, and the thrust reverser cowls. The demountable powerplant consists of the engine and its accessories, the engine air intake, the primary exhaust (including centerbody) and the engine mounts. The propulsion systems mounted on the right and left wings are interchangeable except for the fan cowl door strake. Each fan cowl incorporates provisions for mounting the strake; the strake is to be installed on the inboard and outboard side of each propulsion system.

 2. Description

___________
 A. Engine (Ref. 72-00-00) (Ref. Fig. 002) The engine is a dual-rotor, variable stator, high-bypass ratio turbofan power plant for subsonic service. The design and configuration of the engine are based on obtaining long life high reliability and easy access for line maintenance. It is a modular design which permits the changing of a major assembly without complete dissassembly of the engine. The principal modules of the engine are the low pressure compressor (fan stator and fan rotor), high pressure compressor, turbine frame, combustor chamber, high pressure turbine, low pressure turbine and gearbox.
 B. Cowling
 (Ref. 71-10-00)
 (Ref. Fig. 003)
 The cowling assembly consists of :

 - the air intake cowl

 - the fan cowl

 - the thrust reverser cowl

 - the primary exhaust (primary nozzle and center body).
 The thrust reverser and the primary exhaust are covered by chapter 78.
 The hinged thrust reverser and fan cowls are attached to the pylon.
 The fan cowls are hinged at the upper part by three hinges.
 They are held open by hold-open rods and provide access to the engine for
 :

 - maintenance

  F 『 EEFF : ALL E Page 1 71-00-00 E E Feb 01/98 E E ECES E F 『 E C F M E E E E 56-5B E

 Nacelle
 Figure 001

 F 『 EEFF : ALL E Page 271-00-00
 E E Feb 01/98 E E ECES E F 『 E C F M E E E E 56-5B E

 Engine - Schematic
 Figure 002

 F 『 EEFF : ALL E Page 371-00-00
 E E Feb 01/98 E E ECES E F 『 E C F M E E E E 56-5B E

 Nacelle Dimensions
 Figure 003

 F 『 EEFF : ALL E Page 471-00-00
 E E Feb 01/98 E E ECES E F 『 E C F M E E E E 56-5B E E E

 - rigging

 - trouble shooting

 - engine removal/installation

 C. Mounts (Ref. 71-20-00) The engine is attached to the pylon by two damage tolerant mounts. The mounts are the main attaching structures (forward and aft). The forward mount comprises four attach bolts that connect the engine directly to the pylon. The aft mount consists of a link and beam system attaching the engine to the pylon.
 D. Attachment Fittings (Ref. 71-40-00) The attachment fittings and support brackets ensure the attachment on the engine of :
 - components

 - ducts

 - pipes

 - electrical cables
 The attachment fittings and support brackets are attached on :

 - the engine core

 - the fan case

 - the accessories

 - the accessory gearbox.

 E. Fire Protection (Ref. 26-00-00) Firewalls and fire seals provide segregation and fire protection between the engine compartments (fan and core compartments). The fire seals separate the space within the engine into compartments. This means of isolation limits propagation, should a fire occur. The pylon floor forms the upper firewall of both the fan and core compartments.
　
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM 動力裝置 POWER PLANT 1(12)