F 『
E C F M E
E E
E 56-5B E
E E
3. Job Set-up
__________
Subtask 71-13-00-941-051
A. Safety Precautions
(1) On the center pedestal, on the ENG panel 115VU:
(a) Put a warning notice to tell persons not to start the engine.
(2) Make sure that the engine 1(2) shutdown occurred not less than 5 minutes before you do this procedure.
(3) On the overhead maintenance panel 50VU:
(a) Make sure that the ON legend of the ENG/FADEC GND PWR/1(2) pushbutton switch is off.
(b) Put a warning notice to tell persons not to energize the FADEC 1(2).
4. Procedure
_________ R (Ref. Fig. 201/TASK 71-13-00-991-300, 202/TASK 71-13-00-991-302) Subtask 71-13-00-010-050
A. Opening of the fan cowl doors R CAUTION : DO NOT USE A SCREWDRIVER ON THE LATCH TRIGGER TO RELEASE THE
_______ R LATCH. THE SCREWDRIVER BLADE COULD PUSH THE HOOK SPRING AND R MOVE IT BEHIND THE ROLLER. DAMAGE TO THE HOOK SPRING CAN OCCUR. R IF THE HOOK SPRING IS DAMAGED, THE LATCH HANDLE WILL NOT HANG R DOWN CORRECTLY.
R (1) Push the trigger to release the latch handle.
(2) Pull the latch handles down to disengage the latch hooks from the right door.
(3) Move the lock rings to release the hold-open rods from the stow brackets.
(4) Extend the hold-open rods: CAUTION : BOTH HOLD-OPEN RODS ON BOTH DOORS MUST BE ENGAGED WHEN DOOR
_______
IS OPEN.
F 『 EEFF : ALL E Page 20271-13-00
E E Feb 01/00 E E ECES E F 『 E C F M E E E E 56-5B E
Fan Cowl Doors
Figure 201/TASK 71-13-00-991-300
F 『 EEFF : ALL E Page 20371-13-00
E E Feb 01/98 E E ECES E F 『 E C F M E E E E 56-5B E F 『 E C F M E E E E 56-5B E E E
R R Fan Cowl Doors Figure 202/TASK 71-13-00-991-302
F EEFF : E E ECES ALL 『E 71-13-00EEE Page 204 Feb 01/00
(a) Extend the hold-open rods to hold the doors open at either the 40-degree or 55-degree position.
(5) Attach the hold-open rods to the attach brackets on the engine case.
F 『 EEFF : ALL E Page 20571-13-00
E E Feb 01/00 ERE
ECES E
F 『
E C F M E
E E
E 56-5B E
E E
TASK 71-13-00-410-040
Closing of the Fan Cowl Doors
1. Reason for the Job
__________________
Self Explanatory
2. Job Set-up Information
______________________
A. Fixtures, Tools, Test and Support Equipment
-------------------------------------------------------------------------------
REFERENCE QTY DESIGNATION
-------------------------------------------------------------------------------
No specific warning notice
B. Referenced Information
-------------------------------------------------------------------------------
REFERENCE DESIGNATION
-------------------------------------------------------------------------------
71-13-00-800-041 Adjustment of the Fan Cowl Doors 71-13-00-991-300 Fig. 201 R 71-13-00-991-302 Fig. 202
3. Job Set-up
__________
Subtask 71-13-00-860-050
A. Aircraft Maintenance Configuration
(1) On the center pedestal, on the ENG panel 115VU, make sure that a warning notice is in position to tell persons not to start the engine.
(2) On the overhead maintenance panel 50VU, make sure that the ON legend of the ENG/FADEC GND PWR/1(2) pushbutton switch is off. Make sure that a warning notice is in position to tell persons not to energize the FADEC 1(2).
F 『 EEFF : ALL E Page 20671-13-00
E E Feb 01/00 E E ECES E
F 『
E C F M E
E E
E 56-5B E
E E
4. Procedure
_________
(Ref. Fig. 201/TASK 71-13-00-991-300, 202/TASK 71-13-00-991-302)
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM 動力裝置 POWER PLANT 1(103)
