-
the SLIDE ARMED indicator light (21WN1) goes off.
-
the symbol of the forward left emergency exit becomes green. The EMERGENCY message goes out of view.
R A. Remove the safety clip(s) and the tag(s) and close this(these) circuit R breaker(s): R 1WL, 2WL, 3WL
R Subtask 52-73-00-860-058
R B. Put the aircraft back to its initial configuration.
R (1) Do an EIS stop procedure (Ref. TASK 31-60-00-860-002).
R 1EFF : 301-399, 1 52-73-00Page 516 1 1 May 01/04 1 1 1CES 1
R Subtask 52-73-00-941-052
R C. Close Access
R (1) Make sure that the work area is clean and clear of tool(s) and other
R items.
R (2) Obey the special precautions after the work on the emergency exit
R (Ref. TASK 52-22-00-860-004).
R (3) Close the emergency exit (Ref. TASK 52-22-00-410-002).
R (4) Remove the access platform(s).
R Subtask 52-73-00-862-055
R D. De-energize the aircraft electrical circuits
R (Ref. TASK 24-41-00-862-002).
R 1EFF : 301-399, 1 52-73-00Page 517 1 1 May 01/04 1 1 1CES 1R **ON A/C 151-199, 401-499,
TASK 52-73-00-710-002-A
Operational Test of the Warning System Related to the Emergency Exits
1.
Reason for the Job
__________________
Self Explanatory
2.
Job Set-up Information
______________________
A. Fixtures, Tools, Test and Support Equipment
-------------------------------------------------------------------------------
REFERENCE QTY DESIGNATION
-------------------------------------------------------------------------------
No specific circuit breaker(s) safety clip(s)
B. Referenced Information
-------------------------------------------------------------------------------
REFERENCE DESIGNATION
-------------------------------------------------------------------------------
24-41-00-861-002 Energize the Aircraft Electrical Circuits from the External Power 24-41-00-862-002 De-energize the Aircraft Electrical Circuits Supplied
from the External Power
31-60-00-860-001 EIS Start Procedure
31-60-00-860-002 EIS Stop Procedure
52-73-00-991-002 Fig. 502
3. Job Set-up
__________
Subtask 52-73-00-861-056
A. Energize the aircraft electrical circuits
(Ref. TASK 24-41-00-861-002).
R 1EFF : 151-199, 401-499, 1 52-73-00Page 518 1 1 Aug 01/05 1 1 1CES 1 Subtask 52-73-00-860-052
B. Aircraft Maintenance Configuration
(1)
Do an EIS start procedure (Ref. TASK 31-60-00-860-001).
(2)
On the ECAM control panel, push the DOOR key (on the lower ECAM display unit, the DOOR/OXY page comes into view).
Subtask 52-73-00-865-066
C. Make sure that this(these) circuit breaker(s) is(are) closed: -------------------------------------------------------------------------------
PANEL ------ DESIGNATION ------------------------------------------------------- IDENT. LOCATION------------------
121VU EIS/SLIDES/ARM AND WARN/FLT 15WN P11
121VU EIS/SLIDES/ARM AND WARN/GND 13WN P10
Subtask 52-73-00-865-067
D. Open, safety and tag this(these) circuit breaker(s):
------PANEL -------------------------------------------------------DESIGNATION ------------------IDENT. LOCATION
-------------------------------------------------------------------------------49VU LIGHTING/EMER LT/CABIN 2WL H06 49VU LIGHTING/EMER LT/CABIN 1WL H05
122VU LIGHTING/CABIN/EMER/LT 3WL V07
R 1EFF : 151-199, 401-499, 1 52-73-00Page 519 1 1 Aug 01/05 1 1 1CES 1
4. Procedure
_________ Subtask 52-73-00-710-056
A. Operational Test of the Warning System Related to the Emergency Exit (Ref. Fig. 502/TASK 52-73-00-991-002)
(1) Do the test below:
-------------------------------------------------------------------------------ACTION RESULT -------------------------------------------------------------------------------
1. On the hatch (left emergency exit):
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM DOORS 艙門8(63)
