52-71-12-991-002-A Fig. 402B
1EFF : ALL 1 52-71-12Page 415 1 1 Aug 01/05 1 1 1CES 1 **ON A/C ALL
3. Job Set-up
__________
**ON A/C 001-049, 051-099, 101-149, 201-299, 301-399,
Subtask 52-71-12-010-051
A. Get Access
(1)
Open the applicable cargo door (Ref. TASK 52-30-00-860-001) to get access to the door sill area.
(2)
Put the access platform in position for the applicable cargo door.
(3)
If required, remove the access panel(s) 825AR and/or 826AR to get access to the switch mechanism.
R **ON A/C 151-199, 401-499,
Subtask 52-71-12-010-051-A
A. Get Access
(1)
Open the applicable cargo door (Ref. TASK 52-30-00-860-001) to get access to the door sill area.
(2)
Put the access platform in position for the applicable cargo door.
(3)
If required, remove the access panel(s) 825AR and/or 826AR, 826BR and 826CR to get access to the switch mechanism.
**ON A/C ALL
Subtask 52-71-12-865-053
B. Open, safety and tag this(these) circuit breaker(s):
-------------------------------------------------------------------------------PANEL DESIGNATION IDENT. LOCATION -------------------------------------------------------------------------------
49VU L/G/LGCIU/SYS1/NORM 1GA C09 122VU DOORS/CARGO 1MJ T12
1EFF : ALL 1 52-71-12Page 416 1 1 Aug 01/05 1 1 1CES 1
4. Procedure
_________
Subtask 52-71-12-020-051
A. Removal of the Proximity Switch
**ON A/C 001-049, 051-099, 101-105, 201-220,
(Ref. Fig. 402/TASK 52-71-12-991-002) R **ON A/C 106-149, 221-299, 301-399, 401-499,
(Ref. Fig. 402A/TASK 52-71-12-991-002-B)
**ON A/C 151-199,
(Ref. Fig. 402B/TASK 52-71-12-991-002-A)
**ON A/C ALL
(1)
Remove the proximity sensor (23) as follows:
(a)
Disconnect the electrical connector (21) from the proximity sensor (23).
(b)
Install blanking caps on the electrical connector (21) and the receptacle of the proximity sensor (23).
(c)
Remove the nuts (26), the washers (25), the bolts (22) and the proximity sensor (23) from the fuselage fitting (24).
(2)
Remove the target (31) as follows:
(a)
Remove the nuts (34), the washers (33) and the bolts (30) from the target lever (32).
(b)
Remove the target (31) from the target lever (32).
1EFF : ALL 1 52-71-12Page 417 1 1 Aug 01/05 1 1 1CES 1
Proximity Switches 30WV and 32WV
Figure 402/TASK 52-71-12-991-002
R 1EFF : 001-049, 051-099, 101-105, 201-220, 1 52-71-12Page 418 1 1 May 01/05 1 1 1CES 1
Proximity Switches 30MV and 32MV
Figure 402A/TASK 52-71-12-991-002-B
R 1EFF : 106-149, 221-299, 301-399, 401-499, 1 52-71-12Page 419 1 1 Aug 01/05 1 1 1CES 1
Proximity Switches 30WV and 32WV
R Figure 402B/TASK 52-71-12-991-002-A
R 1EFF : 151-199, 1 52-71-12 Page 420
1 1 May 01/05
1 1
1CES 1
TASK 52-71-12-400-002
Installation of the Proximity Switches 30WV and 32WV
1. Reason for the Job__________________
Self Explanatory
2. Job Set-up Information______________________
A. Fixtures, Tools, Test and Support Equipment
-------------------------------------------------------------------------------REFERENCE QTY DESIGNATION -------------------------------------------------------------------------------
No specific access platform 3.50 m (11 ft. 6 in.)
B. Consumable Materials
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
Material No. 09-013 USA MIL-PRF-81733 TYPE I CLASS A CORROSION INHIBITING BRUSH CONSISTENCY (Ref. 20-31-00)
R C. Expendable Parts
R R R -------------------------------------------------------------------------------FIG.ITEM |DESIGNATION |IPC-CSN -------------------------------------------------------------------------------
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM DOORS 艙門8(41)
