(2)
 If necessary, discard the proximity switches

 (a)
 For 11WV1, 11WV2, 13WV1, 13WV2, 15WV1, 15WV2, 17WV1 and 17WV2: (Ref. TASK 52-71-11-000-001), (Ref. TASK 52-71-11-400-001).

 (b)
 For 25WV: (Ref. TASK 52-71-11-000-003), (Ref. TASK 52-71-11-400-003).

 (c)
 For 28WV and 34WV: (Ref. TASK 52-71-12-000-001), (Ref. TASK 52-71-12-400-001).

 1EFF : ALL 1 52-71-00Page 607 1 1 Feb 01/05 1 1 1CES 1

 (d)
 For 30WV and 32WV: (Ref. TASK 52-71-12-000-002), (Ref. TASK 52-71-12-400-002).

 (e)
 For 19WV1, 19WV2, 21WV1 and 21WV2: (Ref. TASK 52-71-13-000-001), (Ref. TASK 52-71-13-400-001).

 (f)
 For 23WV, 36WV, 38WV and 40WV: (Ref. TASK 52-71-14-000-001), (Ref. TASK 52-71-14-400-001).

 5. Close-up
________
 Subtask 52-71-00-420-059
 A. Installation of the Component
 (1)
 Put the insulation back in position.

 (2)
 Install the lining panels:
 FOR 11WV1
 221JW (Ref. TASK 25-23-45-000-005).
 FOR 11WV2
 222JW (Ref. TASK 25-23-45-000-002).
 FOR 13WV1
 831EZ, 831CZ (Ref. TASK 25-23-46-000-001).
 FOR 13WV2
 841EZ, 841CZ (Ref. TASK 25-23-46-000-001).
 FOR 15WV1
 261UW (Ref. TASK 25-23-45-000-003).
 FOR 15WV2
 262UW (Ref. TASK 25-23-45-000-004).
 FOR 17WV1
 832EZ 832CZ (Ref. TASK 25-23-46-000-002).
 FOR 17WV2
 842EZ 842CZ (Ref. TASK 25-23-46-000-002).
 FOR 30WV, 32WV
 825AR and/or 826AR, 826BR and 826CR

 Subtask 52-71-00-865-080
 B. Remove the safety clip(s) and the tag(s) and close this(these) circuit breaker(s): FOR 11WV1, 11WV2, 13WV1, 13WV2, 15WV1, 15WV2, 17WV1, 17WV2 15WN, 13WN, 48WV FOR 25WV C/B NOT APPLICABLE FOR 28WV, 30WV, 32WV, 34WV 1MJ, 1GA
 1EFF : ALL 1 52-71-00Page 608 1 1 Feb 01/05 1 1 1CES 1

 FOR 19WV1, 19WV2, 21WV1, 21WV2
 15WN, 13WN
 FOR 23WV, 36WV, 38WV, 40WV
 6HQ, 46WV

 Subtask 52-71-00-410-094
 C. Close Access
 (1)
 For 11WV1, 11WV2, 13WV1, 13WV2, 15WV1, 15WV2, 17WV1 and 17WV2:

 (a)
 Obey the special precautions after the work on the door (Ref. TASK 52-10-00-860-002).

 (b)
 Remove all the ground support equipment, the maintenance equipment, the standard and special tools and all other items.

 (c)
 Make sure that the work area is clean and clear of tool(s) and other items.

 (d)
 Close the passenger/crew door 831 or 841 or 832 or 842 (Ref. TASK 52-10-00-410-001).

 (e)
 Remove the access platform(s).

 (2)
 For 25WV:

 (a)
 Remove all the ground support equipment, the maintenance equipment, the standard and special tools and all other items.

 (b)
 Make sure that the work area is clean and clear of tool(s) and other items.

 (c)
 Close the passenger/crew door 831 or 841, (Ref. TASK 52-10-00-410-001).

 (d)
 Remove the access platform(s).

 (3)
 For 28WV and 34WV:

 (a)
 Remove all the ground support equipment, the maintenance equipment, the standard and special tools and all other items.

 (b)
 Make sure that the work area is clean and clear of tool(s) and other items. Remove the access platform(s).

 1EFF : ALL 1 52-71-00Page 609 1 1 Feb 01/05 1 1 1CES 1

 (4)
 For 30WV and 32WV:

 (a)
 Make sure that the work area is clean and clear of tool(s) and other items.

 (b)
 Remove the access platform(s). Make sure that the cargo door is correctly closed (Ref. TASK 52-30-00-860-002).

 (5)
 For 19WV1, 19WV2, 21WV1 and 21WV2:

 (a)
 Make sure that the work area is clean and clear of tool(s) and other items.

 (b)
 Make sure that the cover flap is correctly installed on the emergency exit hatch (Ref. TASK 25-23-47-400-001).

 (c)
 Close the FWD and/or AFT passenger/crew door (Ref. TASK 52-10-00-410-001)

 (6)
 For 23WV, 36WV, 38WV and 40WV:

 (a)
 Make sure that the work area is clean and clear of tool(s) and other items.

 (b)
 Close the avionics compartment door :
 For 36WN
 811
 For 23WV
 812
 For 38WV
 822
 For 40WV

 824. (Ref. TASK 52-41-00-410-002)
　
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM DOORS 艙門8(33)