曝光臺 注意防騙 網曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

 NOTE : The Call System and the lighted signs NO SMOKING, FASTEN SEAT BELT____ and RETURN TO SEAT are part of the Cabin Intercommunication Data System (CIDS) (Ref. 23-73-00).
 2. Description___________
 A. General Illumination 
R R R R R R R R R R R  (Ref. Fig. 001) (Ref. 33-21-00) The general illumination system has fluorescent tubes which are installed in the ceiling panels along the center aisle (CEILING lights), above the windows (WINDOW lights) and at each entrance. They illuminate the cabin and the entrance areas. The cabin attendants control the general illumination through the Forward Attendant Panel (FAP) and the Additional Attendant Panel(s) (AAP), which are part of the Cabin Intercommunication Data System (CIDS) (Ref. 23-73-00). 
R R  NOTE : The installation of the Additional Attendant Panel(s) (AAP) is a____ customer option.
 B. Lavatory Lighting (Ref. Fig. 002) (Ref. 33-24-00) The lavatory lighting system gives illumination inside the lavatories. Each lavatory has a fluorescent tube and additional halogen light(s). A microswitch in the lavatory door frame controls the brightness level of the fluorescent tube and the halogen light(s). The cabin attendants control the power of the lavatory lighting system through a membrane switch (POWER LAV) on the Forward Attendant Panel (FAP).

 

R  General Illumination - Schematic Figure 001 
R 1EFF : 1 1 1CES  ALL  1 111 33-20-00 Page 2 Feb 01/00

 

 Lavatory Lighting - Schematic (Example) Figure 002
 1EFF : 1 1R 1CES  ALL  1 11 1 33-20-00 Page 3 Aug 01/04

 

 NOTE : The installation of the additional halogen light(s) is a customer
____
 option.

 C. Passenger Reading Lights (Ref. 33-25-00) The passenger reading lights are high intensity lights, which give additional illumination to the passengers. Each passenger controls his own reading light through a pushbutton. The cabin attendants control the power of the reading light system through a membrane switch (POWER READ) on the Forward Attendant Panel (FAP).
 D. Lavatory Lighted Signs (Ref. Fig. 002) (Ref. 33-26-00) The lavatory lighted signs indicate if the lavatories are occupied or not. A microswitch in the lavatory door frame controls the power of the lavatory lighted signs.
 E. Cabin Attendant Work-Lights (Ref. 33-27-00) The cabin attendant work-lights are high intensity lights, which give additional illumination to the attendants and their working areas. Each attendant controls his own work-light through a pushbutton. The cabin attendants control the power of the work-light system through a membrane switch (POWER ATTN) on the Forward Attendant Panel (FAP).
 NOTE : The installation of the cabin attendant work-lights is a customer
____
 option.

 1EFF : ALL 1 33-20-00Page 4 1 1 Aug 01/04R 1 1 1CES 1

R  CABIN - DEACTIVATION/REACTIVATION_________________________________
 TASK 33-20-00-040-001
 Deactivation of the Cabin NO SMOKING / FASTEN SEAT BELTS / RETURN TO SEAT (NS/FSB/RTS) Signs
 1. Reason for the Job__________________ 
R R R  Refer to the MMEL TASK: 33-20-02 b) Cabin - Cabin Signs (No Smoking/ Fasten Seat Belt/Return to Seat)
 2. Job Set-up Information______________________
 A. Fixtures, Tools, Test and Support Equipment
 -------------------------------------------------------------------------------REFERENCE QTY DESIGNATION -------------------------------------------------------------------------------
No specific  warning notices
 B. Referenced Information
 -------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
23-73-00-710-017 24-41-00-861-002 24-41-00-862-002  Operational Test of the Cabin SignsEnergize the Aircraft Electrical Circuits from the External PowerDe-energize the Aircraft Electrical Circuits Supplied from the External Power
 3. Job Set-up__________
 Subtask 33-20-00-861-051
 A. Energize the aircraft electrical circuits (Ref. TASK 24-41-00-861-002).

 

 4. Procedure
_________ Subtask 33-20-00-040-051
 A. Deactivation of the Cabin NS/FSB/RTS Signs
 (1)
 Do the operational test of the cabin signs (Ref. TASK 23-73-00-710-017) and find the defective NS/FSB/RTS sign(s).

 (2)
 Find the passenger seats from which you cannot see the serviceable NS/FSB/RTS sign.

 (3)
 Put warning notices in position on these seats to tell the passengers not to use them.

 NOTE : It must be possible to see a serviceable NS/FSB/RTS sign from
____
 every passenger seat that is in use.
　
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM LIGHTS 燈光1(50)