(2)
Write a note in the aircraft technical log that the lens of the tail navigation light has been reactivated.
5. Close-up
________ Subtask 33-41-00-865-059
A. Remove the safety clip(s) and the tag(s) and close this(these) circuit breaker(s): 2KD, 1KD, 1LA, 2LA.
Subtask 33-41-00-942-053
B. Removal of Equipment
(1)
Make sure that the work area is clean and clear of tool(s) and other items.
(2)
Remove the safety barriers.
(3)
Remove the warning notice(s).
(4)
Remove the access platform(s).
(5)
Remove the ground support and maintenance equipment, the special and standard tools and all other items.
NAVIGATION LIGHTS - ADJUSTMENT/TEST
___________________________________
TASK 33-41-00-710-001
Operational Test of the Navigation Lights
WARNING : PUT THE SAFETY DEVICES AND THE WARNING NOTICES IN POSITION BEFORE YOU
_______
START A TASK ON OR NEAR:
-
THE FLIGHT CONTROLS
-
THE FLIGHT CONTROL SURFACES
-
THE LANDING GEAR AND THE RELATED DOORS
-COMPONENTS THAT MOVE.
WARNING : MAKE SURE THAT THE GROUND SAFETY-LOCKS ARE IN POSITION ON THE LANDING
_______
GEAR.
1. Reason for the Job
__________________
R R Self Explanatory
2. Job Set-up Information
______________________
A. Fixtures, Tools, Test and Support Equipment
-------------------------------------------------------------------------------
REFERENCE QTY DESIGNATION
-------------------------------------------------------------------------------
No specific safety barriers
No specific warning notice
B. Referenced Information
-------------------------------------------------------------------------------
REFERENCE DESIGNATION
-------------------------------------------------------------------------------
24-41-00-861-002 Energize the Aircraft Electrical Circuits from the External Power 24-41-00-862-002 De-energize the Aircraft Electrical Circuits Supplied from the External Power 33-41-00-991-001 Fig. 501
3. Job Set-up
__________ Subtask 33-41-00-941-056
A. Safety Precautions
(1)
Put the safety barriers in position.
(2)
Put a warning notice on the panel 25VU to tell persons not to operate the navigation lights or the strobe lights.
Subtask 33-41-00-861-050
B. Energize the Electrical Circuits
(1) Energize the aircraft electrical circuits (Ref. TASK 24-41-00-861-002).
4. Procedure
_________ (Ref. Fig. 501/TASK 33-41-00-991-001) Subtask 33-41-00-710-050
A. Operational Test
(1) Operational Test of the Navigation Lights
-------------------------------------------------------------------------------ACTION RESULT -------------------------------------------------------------------------------
1. On the EXT LT control panel 25VU: - put the toggle switch NAV & LOGO (3LA) to the 1 position - the NAV 1 lamps of the navigationlights (9LA and 10LA) come on- the NAV 1 lamp of the navigation light (15LA) comes on
- put the toggle switch NAV & LOGO (3LA) to the 2 position - the NAV 2 lamps of the navigationlights (9LA and 10LA) come on and the NAV 1 lamps go off - the NAV 2 lamp of the navigation light (15LA) comes on and the NAV 1 lamp goes off
- put the toggle switch NAV & LOGO (3LA) to the OFF position. - the navigation lights (9LA, 10LA and15LA) go off.
1EFF : ALL 1 33-41-00Page 502 1 1 May 01/05R 1 1 1CES 1
Navigation Lights - Component Location
Figure 501/TASK 33-41-00-991-001
1EFF : ALL 1 33-41-00 Page 503
1 1 Feb 01/98
中國航空網(wǎng) m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護(hù)手冊 AMM LIGHTS 燈光1(142)
