1EFF : ALL 1 33-35-00Page 504 1 1 Aug 01/99R 1 1 1CES 1
LIGHT - DOME, AVIONICS COMPARTMENT (6LS,7LS,8LS,9LS,10LS,22LS)
______________________________________________________________ REMOVAL/INSTALLATION
____________________
TASK 33-35-11-000-002
Removal of the Avionics-Compartment Dome Lights (6LS, 7LS, 8LS, 9LS, 10LS, 22LS)
CAUTION : DO NOT TOUCH THE LAMP GLASS WITH YOUR FINGERS.
_______ THE OILS FROM YOUR SKIN WILL QUICKLY CAUSE DETERIORATION OF THE LAMP. IF YOU ACCIDENTALLY TOUCH THE LAMP GLASS, CLEAN IT WITH A LINT-FREE CLOTH.
1. Reason for the Job
__________________
Self Explanatory
2. Job Set-up Information
______________________
A. Fixtures, Tools, Test and Support Equipment
-------------------------------------------------------------------------------REFERENCE QTY DESIGNATION
-------------------------------------------------------------------------------
No specific blanking caps
No specific circuit breaker(s) safety clip(s)
FOR FIN 6LS, 7LS
No specific access platform 1.6 m (5 ft. 3 in.)
FOR FIN 8LS
No specific access platform 1.6 m (5 ft. 3 in.)
FOR FIN 10LS, 9LS
No specific access platform 1.6 m (5 ft. 3 in.)
FOR FIN 22LS
No specific access platform 1.6 m (5 ft. 3 in.)
B. Referenced Information
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
33-35-11-991-001 Fig. 401 3. Job Set-up
__________
Subtask 33-35-11-865-053
A. Open, safety and tag this(these) circuit breaker(s):
-------------------------------------------------------------------------------PANEL DESIGNATION IDENT. LOCATION -------------------------------------------------------------------------------
122VU LIGHTING/AVNCS COMPT/DOME 1LS Z07
Subtask 33-35-11-010-051
B. Get access to the Avionics Compartment
FOR 6LS, 7LS
-
put the access platform in position at zone 121,
- open the door 811.
FOR 8LS
-
put the access platform in position at zone 124,
- open the door 822.
FOR 9LS, 10LS
-
put the access platform in position at zone 128,
- open the door 824.
FOR 22LS
-
put the access platform in position at zone 123,
- open the door 812.
4. Procedure
_________
(Ref. Fig. 401/TASK 33-35-11-991-001)
Subtask 33-35-11-020-052
A. Removal of the bulb
(1)
Loosen the three captive screws (7). During this operation, hold the cover (6).
(2)
Remove the cover (6).
(3)
Remove the bulb (1).
Avionics-Compartment Dome Lights
Figure 401/TASK 33-35-11-991-001
1EFF : ALL 1 33-35-11 Page 403
1 1 Feb 01/98
1 1
1CES 1
Subtask 33-35-11-020-053
B. Removal of the dome light
(1)
Loosen the three screws (2) from the housing (3). During this operation hold the dome light (4).
(2)
Disconnect the electrical connectors (5).
(3)
Put the blanking caps on the electrical connectors (5).
(4)
Remove the dome light support (4).
TASK 33-35-11-400-002
Installation of the Avionics-Compartment Dome Lights (6LS, 7LS, 8LS, 9LS, 10LS, 22LS)
CAUTION : DO NOT TOUCH THE LAMP GLASS WITH YOUR FINGERS.
_______ THE OILS FROM YOUR SKIN WILL QUICKLY CAUSE DETERIORATION OF THE LAMP. IF YOU ACCIDENTALLY TOUCH THE LAMP GLASS, CLEAN IT WITH A LINT-FREE CLOTH.
1. Reason for the Job
__________________
Self Explanatory
2. Job Set-up Information
______________________
A. Fixtures, Tools, Test and Support Equipment
-------------------------------------------------------------------------------REFERENCE QTY DESIGNATION
-------------------------------------------------------------------------------
FOR FIN 6LS, 7LS
No specific access platform 1.6 m (5 ft. 3 in.)
FOR FIN 8LS
中國航空網(wǎng) m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機(jī)維護(hù)手冊(cè) AMM LIGHTS 燈光1(126)
