(e)
 Use the INSERTION/REMOVAL TOOL to disconnect the electrical connectors (11).

 (f)
 Remove the screws (2), the washers (1) and the nuts (13) from the bracket (14).

 (g)
 Remove the loading-area light-housing (10).

 (h)
 Remove the flange assembly (3).

 (2)
 Removal of the Bulb of the Loading-Area Light
 (Ref. Fig. 402/TASK 33-34-12-991-002)

 (a)
 Loosen the screw (1) of the clamping ring (2).

 (b)
 Remove the clamping ring (2) together with the sealing (3) and the lens (4).

 Removal/installation of the Loading-Area Light Figure 401/TASK 33-34-12-991-001
 1EFF : 1 1R 1CES  ALL  1 11 1 33-34-12 Page 404 Feb 01/00

 Removal/Installation of the Bulb of the Loading-Area Light
 Figure 402/TASK 33-34-12-991-002

 (c) Remove the bulb (5) from the loading-area light housing (6).

R **ON A/C 151-199, 401-499,

 Subtask 33-34-12-020-050-A
 A. Removal of the Loading-Area Light (11LU, 12LU)
 (Ref. Fig. 403/TASK 33-34-12-991-003)

 (1)
 Removal of the FWD Loading-Area Light

 (a)
 Remove the screws (7) from the access panel (6).

 (b)
 Remove the access panel (6).

 (c)
 Remove the screws (9), the washers (8) and the nuts (12).

 (d)
 Remove the bracket assembly (5) and the gasket (4).

 (e)
 Use the INSERTION/REMOVAL TOOL (M81969-14-02) to disconnect the electrical connectors (11).

 (f)
 Remove the screws (2), the washers (1) and the nuts (13) from the bracket (14).

 (g)
 Remove the loading-area light-housing (10).

 (h)
 Remove the flange assembly (3).

 (2)
 Removal of the AFT Loading-Area Light

 (a)
 Remove the screws (32), and the spacers (31) from the bracket assembly (21).

 (b)
 Carefully lower the loading-area light-housing (30) from the bracket assembly (21).

 NOTE : The loading-area light-housing is secured by a lanyard.
____
 (c)
 Use the INSERTION/REMOVAL TOOL (M81969-14-02) to disconnect the electrical connectors (33).

 (d)
 Remove the screw (27), the washers (28) and the nut (34) from the lanyard and remove the loading-area light-housing (30).

 (e)
 Remove the access panel (22).

 Removal/Installation of the Loading-Area Light
 Figure 403/TASK 33-34-12-991-003

R 1EFF : 151-199, 401-499, 1 33-34-12Page 407 1 1 Aug 01/05 1 1 1CES 1

 (f)
 Remove the screws (35) from the access panel (22) and remove the bracket assembly (21).

 (g)
 Remove the screw (24), the washers (25) and the nut (26) from the bracket (23) and remove the lanyard (29).

 (3) Removal of the Bulb of the Loading-Area Light (11LU, 12LU) (Ref. Fig. 402/TASK 33-34-12-991-002)
 (a)
 Loosen the screw (1) of the clamping ring (2).

 (b)
 Remove the clamping ring (2) together with the sealing (3) and the lens (4).

 (c)
 Remove the bulb (5) from the loading-area light housing (6).

R 1EFF : 151-199, 401-499, 1 33-34-12Page 408 1 1 Aug 01/05 1 1 1CES 1 **ON A/C ALL

 TASK 33-34-12-400-001
 Installation of the Loading-Area Light (11LU, 12LU)

 1.
 Reason for the Job

__________________
 Self Explanatory

 2.
 Job Set-up Information

______________________
 A. Fixtures, Tools, Test and Support Equipment
 -------------------------------------------------------------------------------
REFERENCE  QTY DESIGNATION
 -------------------------------------------------------------------------------
No specific access platform 2.5 m (8 ft. 2 in.)
 M81969-14-02 1 INSERTION/REMOVAL TOOL

 B. Referenced Information
 -------------------------------------------------------------------------------
REFERENCE  DESIGNATION
 -------------------------------------------------------------------------------
24-42-00-861-001  Energize the Ground Service Network from the External Power
 24-42-00-862-001  De-energize the Ground Service Network Supplied from the External Power
 52-30-00-860-001  Open the FWD or AFT Cargo-Compartment Door with the Yellow Electric Pump
 52-30-00-860-002  Close the FWD or AFT Cargo-Compartment Door with the Yellow Electric Pump
　
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM LIGHTS 燈光1(121)