(2)
 Remove the bulb (2) from the cover (3). To do this, pull the bulb.

 Console and Briefcase Light
 Figure 401/TASK 33-12-15-991-001
 1EFF :  ALL  1  33-12-15 Page 403 
1  1  Feb 01/98
 1  1
 1CES  1

 TASK 33-12-15-400-001

 Installation of the Console and Briefcase Light (17LE, 18LE, 19LE, 20LE, 21LE, 22LE, 23LE, 24LE)
 CAUTION : DO NOT TOUCH THE LAMP GLASS WITH YOUR FINGERS.
_______ THE OILS FROM YOUR SKIN WILL QUICKLY CAUSE DETERIORATION OF THE LAMP. IF YOU ACCIDENTALLY TOUCH THE LAMP GLASS, CLEAN IT WITH A LINT-FREE CLOTH.
 1.
 Reason for the Job

__________________
 Self Explanatory

 2.
 Job Set-up Information

______________________
 A. Expendable Parts
 -------------------------------------------------------------------------------FIG.ITEM |DESIGNATION |IPC-CSN -------------------------------------------------------------------------------
2 bulb 33-12-15 01 -010
 B. Referenced Information
 -------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
33-12-00-710-001 Operational Test of the General Illumination 33-12-15-991-001 Fig. 401
 3. Job Set-up
__________ Subtask 33-12-15-865-051
 A. Make sure that this(these) circuit breaker(s) is(are) open, safetied and tagged
 -------------------------------------------------------------------------------PANEL DESIGNATION IDENT. LOCATION -------------------------------------------------------------------------------122VU LIGHTING/FLOOD/F/O/SIDE 4LE Z06 122VU LIGHTING/FLOOD/CAPT/SIDE 5LE Z05

 Subtask 33-12-15-941-050

 B. Aircraft Maintenance Configuration
 (1)
 Clean the component interface and/or the adjacent area.

 (2)
 Do an inspection of the component interface and/or the adjacent area.

 4. Procedure
_________ (Ref. Fig. 401/TASK 33-12-15-991-001) Subtask 33-12-15-420-050
 A. Installation of the Light
 (1)
 Install the bulb (2) NOTE : Make sure that the bulb (2) is in the correct position in the

____
 cover (3).

 (2)
 Put the cover (3) in position in the housing (1).
 NOTE : Make sure that the cover (3) is locked correctly.

____ Subtask 33-12-15-865-052
 B. Remove the safety clip(s) and the tag(s) and close this(these) circuit breaker(s): 5LE, 4LE
 Subtask 33-12-15-710-050
 C. Test
 (1) Do the operational test of the light (Ref. TASK 33-12-00-710-001).
 5. Close-up
________ Subtask 33-12-15-942-050
 A. Aircraft Maintenance Configuration
 (1) Make sure that the work area is clean and clear of tool(s) and other items.

 RHEOSTAT - FLOODLIGHT (28LE,35LE) - REMOVAL/INSTALLATION
________________________________________________________
 TASK 33-12-17-000-001
 Removal of the Rheostat - Flood Light (28LE, 35LE)

 1.
 Reason for the Job

__________________
 Self Explanatory

 2.
 Job Set-up Information

______________________
 A. Fixtures, Tools, Test and Support Equipment
 -------------------------------------------------------------------------------REFERENCE QTY DESIGNATION -------------------------------------------------------------------------------
No specific blanking caps
 No specific circuit breaker(s) safety clip(s)

 B. Referenced Information
 -------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
33-12-17-991-001 Fig. 401
 3. Job Set-up
__________ Subtask 33-12-17-865-050
 A. Open, safety and tag this(these) circuit breaker(s):
 -------------------------------------------------------------------------------PANEL DESIGNATION IDENT. LOCATION -------------------------------------------------------------------------------49VU LIGHTING/EMER LT/CKPT/DOME 1LE H08 122VU LIGHTING/FLOOD/CTR INST/PNL 2LE Z04

 4. Procedure
_________
 (Ref. Fig. 401/TASK 33-12-17-991-001) Subtask 33-12-17-020-050
 A. Removal of the Pedestal Flood-Light Rheostat (28LE)
 (1)
 Loosen the two fasteners (2).
　
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM LIGHTS 燈光1(35)