Subtask 32-31-00-710-062
C. Test
(1)
Do an operational test of the brake temperature system (Ref. TASK 32-47-00-710-001).
(2)
Do an operational test of the normal brake system (Ref. TASK 32-42-00-710-001).
**ON A/C 051-099,
Subtask 32-31-00-710-062-B
C. Test
(1)
Do an operational test of the brake cooling system (Ref. TASK 32-48-00-710-001).
(2)
Do an operational test of the TPIS (Ref. TASK 32-49-00-710-001).
(3)
Do an operational test of the brake temperature system (Ref. TASK 32-47-00-710-001).
(4)
Do an operational test of the normal brake system (Ref. TASK 32-42-00-710-001).
R **ON A/C 301-399, 401-499,
Subtask 32-31-00-710-062-A
C. Test
(1)
Do an operational test of the brake cooling system (Ref. TASK 32-48-00-710-001).
(2)
Do an operational test of the brake temperature system (Ref. TASK 32-47-00-710-001).
(3)
Do an operational test of the normal brake system (Ref. TASK 32-42-00-710-001).
1EFF : ALL 1 32-31-00Page 516 1 1 Aug 01/05 1 1 1CES 1 **ON A/C ALL
Subtask 32-31-00-942-092
D. Removal of Equipment
(1)
Make sure that the work area is clean and clear of tool(s) and other items.
(2)
Remove the ground support and maintenance equipment, the special and standard tools and all other items.
(3)
Remove the safety barriers.
(4)
Remove the warning notice(s).
1EFF : ALL 1 32-31-00Page 517 1 1 May 01/05R 1 1 1CES 1
TASK 32-31-00-710-001
Operational Check of Retraction Inhibition Baulk
WARNING : PUT THE SAFETY DEVICES AND THE WARNING NOTICES IN POSITION BEFORE YOU
_______ START A TASK ON OR NEAR:
-
THE FLIGHT CONTROLS
-
THE FLIGHT CONTROL SURFACES
-
THE LANDING GEAR AND THE RELATED DOORS
-COMPONENTS THAT MOVE.
WARNING : MAKE SURE THAT THE GROUND SAFETY-LOCKS ARE IN POSITION ON THE LANDING
_______ GEAR.
1. Reason for the Job
__________________
Refer to the MPD TASK: 323100-03
2. Job Set-up Information
______________________
A. Fixtures, Tools, Test and Support Equipment
-------------------------------------------------------------------------------REFERENCE QTY DESIGNATION -------------------------------------------------------------------------------
No specific safety barriers No specific warning notice No specific warning notices
B. Referenced Information
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
24-41-00-861-002 Energize the Aircraft Electrical Circuits from the External Power 24-41-00-862-002 De-energize the Aircraft Electrical Circuits Supplied
from the External Power 29-10-00-864-001 Depressurize the Green Hydraulic System 29-10-00-864-002 Depressurize the Yellow Hydraulic System 29-14-00-614-001 Depressurization of the Hydraulic Reservoirs 29-14-00-614-002 Pressurization of the Hydraulic Reservoirs through
the Ground Connector 32-00-00-481-001 Installation of the Safety Devices on the Landing Gears
1EFF : ALL 1 32-31-00Page 518 1 1 May 01/05R 1 1 1CES 1
3. Job Set-up
__________ Subtask 32-31-00-941-050
A. Safety Precautions
(1)
Put the safety barriers in position.
(2)
Make sure that the ground safety locks are in position (Ref. TASK 32-00-00-481-001).
(3)
On the panel 400VU:
-Make sure that the landing-gear control-lever 6GA is in the DOWN position
-Put a warning notice in position to tell persons not to operate the landing gear.
(4)
Put the warning notices in position to tell persons not to pressurize the Yellow and Green hydraulic systems.
Subtask 32-31-00-860-057
B. Aircraft Maintenance Configuration
(1)
Make sure that the Yellow and the Green hydraulic systems are de-pressurized (Ref. TASK 29-10-00-864-001) and (Ref. TASK 29-10-00-864-002).
(2)
Make sure that the applicable hydraulic reservoirs have been depressurized (Ref. TASK 29-14-00-614-001).
Subtask 32-31-00-861-050
C. Energize the Electrical Circuits
(1) Energize the aircraft electrical circuits
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM LANDING GEAR 起落架4(61)
