Subtask 32-22-13-820-050-A
 D. Adjust the length of the rotating rod (4) as follows:
 (1)
 Disengage the tab of the lockwasher (2) from the nut (3).

 (2)
 Loosen the nut (3).

 (3)
 Turn the nut (1) to make the door (29) touch the stop (30).

 (4)
 Turn the nut (1) 180 deg. to tighten the rotating rod (4).

 (5)
 TORQUE the nut (3) to between 2.5 and 3 m.daN (18.43 and 22.12 lbf.ft) with the ADAPTOR - WRENCH (98AMS172321000).

 (6)
 Safety the nut (3) with a new lockwasher (2).

 (7)
 Safety the nut (1) with the MISCELLANEOUS (Material No. 19-010).

R 1EFF : 106-149, 157-199, 210-299, 301-399, 1 32-22-13Page 412 1401-499, 1Aug 01/05 1 1 1CES 1 **ON A/C ALL

 Subtask 32-22-13-867-051
 E. Extend the NLG
 (1) Extend the NLG (Ref. TASK 32-30-00-867-002). Subtask 32-22-13-220-050
 F. Check of the Gaps and Mismatches
 (1) Do a check of the NLG door gaps and mismatches (Ref. TASK 32-22-00-220-001).
 Subtask 32-22-13-942-050
 G. Preparation for the Test
 (1) Lubricate the doors of the nose landing gear (Ref. TASK 12-22-32-640-002).
 (2) Remove the access platform(s). Subtask 32-22-13-720-050
 H. Functional Test
 (1) Do the functional test of the NLG normal extension and retraction (Ref. TASK 32-31-00-720-003).
 5. Close-up
________ Subtask 32-22-13-860-052
 A. Put the aircraft back to its initial configuration.
 (1)
 Lower the aircraft on its wheels (Ref. TASK 07-11-00-586-001).

 (2)
 Remove the safety barriers.

 (3)
 Remove the warning notice(s).

 (4)
 Make sure that the work area is clean and clear of tool(s) and other items.

 1EFF : ALL 1 32-22-13Page 413 1 1 Feb 01/04R 1 1 1CES 1

 TASK 32-22-13-300-002
 Replacement of the Nose Landing-Gear Aft-Doors Seals
 1. Reason for the Job
__________________
 Self Explanatory
 2. Job Set-up Information
______________________
 A. Fixtures, Tools, Test and Support Equipment
 -------------------------------------------------------------------------------REFERENCE QTY DESIGNATION -------------------------------------------------------------------------------
No specific emery cloth
 No specific safety barriers
 No specific warning notice
 No specific access platform 2.06 m (6 ft. 9 in.)

R No specific Torque Wrench : range 0.00 to 1.20 m.daN
R (0.00 to 9.00 lbf.ft)

 B. Consumable Materials
 -------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
Material No. 09-016  USA MIL-PRF-81733D TYPE II CLASS B
 CORROSION INHIBITING FILLET CONSISTENCY
 (Ref. 20-31-00)

 1EFF : ALL 1 32-22-13Page 414 1 1 May 01/05 1 1 1CES 1

 C. Referenced Information
 -------------------------------------------------------------------------------
REFERENCE DESIGNATION
 -------------------------------------------------------------------------------
32-22-00-010-001 Nose Gear Doors - Ground Doors Opening
 32-22-00-410-001 Nose Gear Doors - Ground Doors Closing
 32-30-00-867-001 Retraction of the Landing Gear for Maintenance
 32-30-00-867-002 Extension of the Landing Gear after Maintenance
 32-22-13-991-006 Fig. 402

 **ON A/C 001-049, 051-061, 101-105, 201-203,
 32-22-13-991-007 Fig. 403 R **ON A/C 062-099, 106-149, 151-199, 204-299, 301-399, 401-499,
 32-22-13-991-007-A Fig. 403A
 **ON A/C ALL
 3. Job Set-up
__________
 Subtask 32-22-13-941-056

 A. Safety Precautions
 (1) Put the warning notice in position to tell persons not to operate the landing gear.
 Subtask 32-22-13-010-053
 B. Get Access
 (1)
 Open the nose gear doors (Ref. TASK 32-22-00-010-001).

 (2)
 Put the access platform in position.

 (3)
 Put the safety barriers in position.

 1EFF : ALL 1 32-22-13Page 415 1 1 Aug 01/05 1 1 1CES 1

 4. Procedure
_________
 (Ref. Fig. 402/TASK 32-22-13-991-006)
 **ON A/C 001-049, 051-061, 101-105, 201-203,

 (Ref. Fig. 403/TASK 32-22-13-991-007) R **ON A/C 062-099, 106-149, 151-199, 204-299, 301-399, 401-499,
 (Ref. Fig. 403A/TASK 32-22-13-991-007-A)
 **ON A/C ALL
　
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM LANDING GEAR 起落架4(13)