(2)
Close the applicable access panel:
-
for the left wing, close 191BB, 191BT, 521BT, 522AB, 522CB, 522FB, 522JB, 522KB, 522LB, 522NB, 522QB, 522SB, 522UB
-
for the right wing, close 192BT, 192FB, 621BT, 622AB, 622CB, 622FB, 622JB, 622KB, 622LB, 622NB, 622QB, 622SB, 622UB.
(3)
Remove the access platform(s).
(4)
Close the MLG doors (Ref. TASK 32-12-00-410-001).
Subtask 27-84-00-865-054
B. Remove the safety clip(s) and the tag(s) and close this(these) circuit breaker(s): 5CV, 7CV.
Subtask 27-84-00-866-051
R C. Retract the Slats
R R (1) Remove the LOCKING TOOL - FLAP/SLAT CONTROL LEVER from the slat/flap control lever.
R (2) Retract the slats fully (Ref. TASK 27-80-00-866-005).
Subtask 27-84-00-942-053
D. Removal of Equipment
(1) Remove the warning notice(s).
(2) Remove the safety barriers.
(3) Remove the ground support and maintenance equipment, the special and standard tools and all other items.
TASK 27-84-00-210-001
Detailed Visual Inspection of the Slat Track Rollers, the Pinions and the
Curved Rack Gears (As Far As Visible)
WARNING : PUT THE SAFETY DEVICES AND THE WARNING NOTICES IN POSITION BEFORE YOU
_______
START A TASK ON OR NEAR:
-
THE FLIGHT CONTROLS
-
THE FLIGHT CONTROL SURFACES
-
THE LANDING GEAR AND THE RELATED DOORS
-COMPONENTS THAT MOVE.
WARNING : MAKE SURE THAT THE GROUND SAFETY-LOCKS ARE IN POSITION ON THE LANDING
_______
GEAR.
1. Reason for the Job
__________________
Refer to the MPD TASK: 278468-02
2. Job Set-up Information
______________________
A. Fixtures, Tools, Test and Support Equipment
-------------------------------------------------------------------------------REFERENCE QTY DESIGNATION -------------------------------------------------------------------------------
No specific circuit breaker(s) safety clip(s)
No specific flashlight
No specific mirror
No specific safety barriers
No specific warning notice(s)
No specific adjustable access platform 4.0 m (13 ft. 1 in.)
R 98D27803000000 1 LOCKING TOOL - FLAP/SLAT CONTROL LEVER
B. Consumable Materials
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
Material No. 11-026 GB DEF-STAN 68-148/1
SOLVENT GENERAL PURPOSE (Ref. 20-31-00)
Material No. 19-003 USA AMS 3819
LINT-FREE COTTON CLOTH (Ref. 20-31-00)
C. Referenced Information
-------------------------------------------------------------------------------
REFERENCE DESIGNATION
-------------------------------------------------------------------------------
12-22-27-640-006 Lubrication of all Slat Track Rollers, Pinion
Bearings, Pinions and Rack Teeth
27-50-00-866-008 Extension of the Flaps on the Ground
27-50-00-866-009 Retraction of the Flaps on the Ground
27-80-00-866-004 Extending the Slats on the Ground
27-80-00-866-005 Retracting the Slats on the Ground
27-84-00-991-008 Fig. 604
**ON A/C 001-049, 051-061, 101-105, 151-152, 201-204,
27-84-00-991-003 Fig. 605 R **ON A/C 062-099, 106-149, 153-199, 205-299, 301-399, 401-499,
27-84-00-991-003-A Fig. 605A
**ON A/C ALL
3. Job Set-up
__________
(Ref. Fig. 604/TASK 27-84-00-991-008)
Subtask 27-84-00-941-056
A. Safety Precautions
(1)
Put the safety barriers in position.
(2)
Put a warning notice(s) in the cockpit to tell persons not to operate the slat controls.
Subtask 27-84-00-866-052
B. Flight Control Surface Configuration WARNING : MAKE SURE THAT THE TRAVEL RANGES OF THE FLIGHT CONTROLS ARE
_______ CLEAR. MOVEMENT OF FLIGHT CONTROLS CAN CAUSE INJURY TO PERSONS AND/OR DAMAGE.
R R Slat Tracks - Component Access Figure 604/TASK 27-84-00-991-008
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM FLIGHT CONTROLS 飛行操縱7(95)
