TASK 25-13-00-440-002 Reactivation of the Captain and/or First Officer Retractable Foot-Rests
1.
Reason for the Job
__________________
Refer to the MMEL TASK: TBD
2.
Job Set-up Information
______________________
A. Referenced Information
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
25-13-14-400-005 Installation of the Captain and First-Officer Retractable Foot-Rests
3. Job Set-up
__________ Subtask 25-13-00-860-057
A. Not Applicable
4. Procedure
_________ Subtask 25-13-00-420-051
A. Reactivation of the Captain and/or First-Officer Retractable Foot-Rests
(1) Install new Captain and/or First-Officer retractable foot-rests (Ref. TASK 25-13-14-400-005).
5. Close-up
________ Subtask 25-13-00-860-058
A. Make sure that the work area is clean and clear of tool(s) and other items.
EFF : ALL
25-13-00Page 404
LINING AND FURNISHINGS - CLEANING/PAINTING
__________________________________________
TASK 25-13-00-100-001
Cleaning of Foam Plastic (Polyurethane) Parts
WARNING : USE SOLVENTS/CLEANING AGENTS, SEALANTS AND OTHER SPECIAL MATERIALS
_______ ONLY WITH A GOOD SUPPLY OF AIR. OBEY THE MANUFACTURERS INSTRUCTIONS. PUT ON PROTECTIVE CLOTHING. DO NOT GET THEM IN YOUR MOUTH. DO NOT SMOKE. DO NOT BREATHE THE GAS. THESE MATERIALS ARE POISONOUS, FLAMMABLE AND SKIN IRRITANT. GET MEDICAL HELP IF YOUR SKIN OR EYES BECOME IRRITATED.
1. Reason for the Job
__________________
Self Explanatory
2. Job Set-up Information
______________________
A. Fixtures, Tools, Test and Support Equipment
-------------------------------------------------------------------------------REFERENCE QTY DESIGNATION -------------------------------------------------------------------------------
No specific lint-free cloth No specific soapy water No specific soft brush
B. Consumable Materials
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
Material No. 11-017 USA AMS 1550 INTERIOR GENERAL PLASTIC CLEANER (Ref. 20-31-00)
EFF : ALL
25-13-00Page 701
C. Referenced Information
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
24-42-00-861-001 Energize the Ground Service Network from the External Power 24-42-00-862-001 De-energize the Ground Service Network Supplied from the External Power
3. Job Set-up
__________
Subtask 25-13-00-861-050
A. Energize the ground service network
(Ref. TASK 24-42-00-861-001).
4. Procedure
_________
Subtask 25-13-00-160-050
A. Cleaning
NOTE : If the foam plastic parts are damaged, send them to the vendor for
____
repair.
(1)
If you find stains of mud, chocolate, fruit juice, blood or sweet drinks on the parts:
-
use a soft brush to clean them with soapy water (natural soap or 5 percent liquid detergent) or
-
use a lint-free cloth to clean them with CLEANING AGENTS (Material No. 11-017)
(2)
If you find stains of ink, tar, engine oil or grease on the parts: use a lint-free cloth to clean them with CLEANING AGENTS (Material No. 11-017).
5. Close-up
________
Subtask 25-13-00-410-050
A. Get Access
(1) Make sure that the work area is clean and clear of tool(s) and other items.
EFF : ALL
25-13-00Page 702
Subtask 25-13-00-862-050
B. De-energize the ground service network (Ref. TASK 24-42-00-862-001).
EFF : ALL
25-13-00Page 703
R TASK 25-13-00-370-001 Painting of the Internal Cockpit Surfaces
1.
Reason for the Job
__________________
Self Explanatory
2.
Job Set-up Information
______________________
A. Fixtures, Tools, Test and Support Equipment
-------------------------------------------------------------------------------
REFERENCE QTY DESIGNATION
-------------------------------------------------------------------------------
No specific masking paper
No specific masking tape
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM EQUIPMENT/FURNISHINGS 設備1(120)
