(4)
 Tighten and safety the screw (15) with BONDING AND ADHESIVE COMPOUNDS (Material No. 08-013).

 (5)
 Engage the lower shroud (11) on the button of the equipped lever (9).

 (6)
 Engage the rear part of the lower shroud (11) on the armrest structure (10).

 (7)
 Engage the armrest (3) on the armrest fitting (4) and install the ball (5) and the retainer (6).

 (8)
 Install the screw (7), the washer (1) and the nut (2).

 (9)
 Tighten the screw (7). NOTE : Adjust the force of the screw (7) on the ball (5) to hold the

____
 armrest back when it moves down.

 EFF : ALL

25-11-65Page 407

R Adjustment of the Captain (First Officer) Seat Armrest Assy Figure 402/TASK 25-11-65-991-002
 EFF : ALL

25-11-65Page 408
May 01/04
 CES

 (10)
 Do the steps that follow to adjust the armrest locking device:

 (a)
 Push the button of the equipped lever (9) to unlock the armrest (3).

 (b)
 Make sure that the button of the equipped lever has a travel of 7 mm (0.27 in.) to unlock the armrest (3).

 (c)
 If necessary, adjust this travel to 7 mm (0.27 in.) with the setscrew (12).

 (11)
 Do the steps that follow to adjust the armrest (3) on the seat:

 (a)
 Move the seat to the lowest position.

 (b)
 Push the button of the equipped lever (9) to unlock the armrest (3).

 (c)
 Move the armrest (3) to the lowest position.

 (d)
 Make sure that the clearance between the armrest (3) and the floor is between 405 and 427 mm (15.95 and 16.81 in.).

 (e)
 If necessary, adjust this clearance to between 405 and 427 mm

 (15.95 and 16.81 in.) with the two nuts (16) and tighten them.

 (f)
 Push the button of the equipped lever (9) to unlock the armrest (3).

 (g)
 Move the armrest (3) to the highest position.

 (h)
 Make sure that the clearance between the armrest (3) and the floor is between 570 and 590 mm (22.44 and 23.23 in.).

 (i)
 If necessary, adjust this clearance to between 570 and 590 mm

 (22.44 and 23.23 in.) with the two nuts (17) and tighten them.

 (12)
 Engage the armcap (8) on the armrest (3) then push it vertically to lock.

 EFF : ALL

25-11-65Page 409

 5. Close-up
________ Subtask 25-11-65-410-050
 A. Installation of the Seat Equipment
 NOTE : Velcro tapes attach the seat cushion to the seat.

____
 NOTE : The seat cushion includes the covers and the foam.

____
 (1)
 Install the lower back shroud and the upper back shroud on the seat (Ref. TASK 25-11-62-400-001).

 (2)
 Install the Captain (First Officer) seat backrest cushion (Ref. TASK 25-11-61-400-001).

 Subtask 25-11-65-862-050
 B. De-energize the ground service network
 (Ref. TASK 24-42-00-862-001).

 EFF : ALL

25-11-65Page 410

 ARMREST ASSY - ASSIST, CAPTAIN/ FIRST OFFICER SEAT - REMOVAL/INSTALLATION
_________________________________________________________________________ TASK 25-11-66-000-001 Removal of the Captain (First Officer) Seat Assist Armrest-Assy
 1.
 Reason for the Job

__________________
 Self Explanatory

 2.
 Job Set-up Information

______________________
 A. Referenced Information
 -------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
24-42-00-861-001  Energize the Ground Service Network from the External Power 25-11-66-991-001 Fig. 401
 3. Job Set-up
__________ Subtask 25-11-66-861-050
 A. Energize the ground service network
 (Ref. TASK 24-42-00-861-001).

 4. Procedure
_________ (Ref. Fig. 401/TASK 25-11-66-991-001) Subtask 25-11-66-020-050
 A. Removal of the Captain (First Officer) Seat Assist Armrest-Assy NOTE : Make marks on all the parts before disassembly to help you and
____
 prevent errors during assembly.

 (1) Remove the three screws (13), the washers (12) and the assist armrest assy from the seat pan.
 NOTE : Make sure that the seat is in the stowed position before you
____ remove the screws (13) and the washers (12).
 EFF : ALL

25-11-66Page 401
May 01/04
R
　
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM EQUIPMENT/FURNISHINGS 設備1(113)