Subtask 24-21-51-010-060
B. Get Access
(1) Open the fan cowl doors (Ref. TASK 71-13-00-010-040): - FOR 1000EM1 437AL, 438AR - FOR 1000EM2 447AL, 448AR
4. Procedure_________
R **ON A/C 001-049, 051-099, 101-149, 151-199, 201-299, 301-399,
R (Ref. Fig. 409/TASK 24-21-51-991-304)
R **ON A/C 401-499,
R (Ref. Fig. 409A/TASK 24-21-51-991-304-A)
R **ON A/C ALL
Subtask 24-21-51-680-055
A. Draining of the IDG oil
(1) Drain the oil from the IDG (Ref. TASK 12-13-24-680-040).
R **ON A/C 001-049, 051-099, 101-149, 151-199, 201-299, 301-399,
Subtask 24-21-51-020-075
B. Removal of the IDG Oil Filter
WARNING : WEAR GOGGLES WHEN YOU REMOVE OR INSTALL THE LOCKWIRE. CUT,_______ REMOVE AND DISCARD THE LOCKWIRE AS YOU DO THE TASK. LOOSE LOCKWIRE CAN CUT OR BLIND YOU.
(1) Cut and remove the lockwire from the filter cover (1).
NOTE : you can put a container 1.5 USgal (5.68 l) below the filter____ cavity.
IDG Oil Filter R Figure 409/TASK 24-21-51-991-304
1EFF : 001-049, 051-099, 101-149, 151-199, 1 24-21-51Page 446 1201-299, 301-399, 1Aug 01/05 1 1 1CES 1
R IDG Oil Filters
R Figure 409A/TASK 24-21-51-991-304-A
1EFF : 401-499, 1 24-21-51 Page 447
1 1 Aug 01/05
1 1
1CES 1
(2) Remove the filter cover (1).
(3) Remove and discard the packing (2) from the filter cover (1).
(4) Remove the filter element (3).
(5) Remove and discard the packing (4) from the filter element (3).
(6) Install a blanking cap on the filter cavity part.
R **ON A/C 401-499,
R Subtask 24-21-51-020-075-A
R B. Removal of the IDG Oil Scavenge and Charge Filters
R R R WARNING : WEAR GOGGLES WHEN YOU REMOVE OR INSTALL THE LOCKWIRE. CUT,_______ REMOVE AND DISCARD THE LOCKWIRE AS YOU DO THE TASK. LOOSE LOCKWIRE CAN CUT OR BLIND YOU.
R NOTE : the procedure is the same for the two filters.____
R (1) Cut and remove the lockwire from the filter cover (1).
R R NOTE : you can put a container 1.5 USgal (5.68 l) below the filter____ cavity.
R (2) Remove the filter cover (1).
R (3) Remove and discard the packing (2) from the filter cover (1).
R (4) Remove the filter element (3).
R (5) Remove and discard the packing (4) from the filter element (3).
R (6) Install a blanking cap on the filter cavity port.
R **ON A/C ALL
Subtask 24-21-51-210-061
C. Inspection of the Filter Element(s)
(1) Do the inspection of the filter element(s) (Ref. TASK 24-21-00-210-044), and if necessary, replace it by a new filter element (3).
TASK 24-21-51-400-041
Installation of the IDG Oil Filter(s)
WARNING : WEAR GOGGLES, INSULATED GLOVES AND OTHER PROTECTIVE CLOTHES.
_______ HOT OIL CAN BURN YOUR EYES AND SKIN. IF OIL TOUCHES YOUR EYES OR SKIN, GET MEDICAL AID.
CAUTION : DO NOT LET ENGINE OIL FALL ON THE ENGINE. UNWANTED OIL MUST BE
_______ REMOVED IMMEDIATELY WITH A CLEAN LINT FREE CLOTH THE OIL CAN CAUSE DAMAGE TO THE SURFACE PROTECTION AND TO SOME PARTS.
1. Reason for the Job
__________________
Self Explanatory
2. Job Set-up Information
______________________
A. Fixtures, Tools, Test and Support Equipment
-------------------------------------------------------------------------------REFERENCE QTY DESIGNATION -------------------------------------------------------------------------------
No specific warning notice No specific Torque Wrench : range 2.00 to 26.00 lbf.ft
(0.20 to 3.60 m.daN)
B. Consumable Materials
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
Material No. 03-002 GB DEF-STAN 91-101 LUBRICATING OIL TURBINE ENGINE SYNT BASE (Ref. 20-31-00)
Material No. 19-010 USA AMS 5687 LOCKWIRE STAINLESS STEEL ANNEALED 0.8MM DIA (Ref. 20-31-00)
C. Expendable Parts
-------------------------------------------------------------------------------FIG.ITEM |DESIGNATION |IPC-CSN -------------------------------------------------------------------------------
中國航空網(wǎng) m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機(jī)維護(hù)手冊 AMM ELECTRICAL POWER 電源1(92)
