曝光臺 注意防騙 網曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

 Self Explanatory 2. Job Set-up Information______________________ A. Fixtures, Tools, Test and Support Equipment
 -------------------------------------------------------------------------------REFERENCE QTY DESIGNATION -------------------------------------------------------------------------------
No specific blanking caps No specific circuit breaker(s) safety clip(s) B. Referenced Information
 -------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
R  25-23-48-000-001 Removal of the Cove Light Panels **ON A/C 051-099, 201-210, 
R R  23-36-44-991-001 Fig. 401 **ON A/C 106-149, 211-299, 
R R  23-36-44-991-001-B **ON A/C 151-199,  Fig. 401A 
R  23-36-44-991-001-A  Fig. 401B 

R 1EFF : 051-099, 106-149, 151-199, 201-299, 1 23-36-44Page 401 1301-399, 1May 01/05 1 1 1CES 1

 -------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
**ON A/C 301-399,
 23-36-44-991-001-C  Fig. 401C 
R  **ON A/C 051-099, 106-149, 151-199, 201-299, 301-399,
 3. Job Set-up__________ 
R  **ON A/C 051-099, 
R  Subtask 23-36-44-865-050-D 
R  A. Open, safety and tag this(these) circuit breaker(s): 
R R R R R R  ------------------------------------------------------------------------------PANEL SERVICE IDENT. LOCATION ------------------------------------------------------------------------------2000VU PES/VIDEO/CTL 21MH 01 C 2000VU PES/VIDEO/CABIN/LH 22MH 02 C 2000VU PES/VIDEO/CABIN/RH 23MH 03 C 
R  **ON A/C 106-149, 211-299,
 Subtask 23-36-44-865-050-B
 A. Open, safety and tag this(these) circuit breaker(s):
 ------------------------------------------------------------------------------PANEL SERVICE IDENT. LOCATION ------------------------------------------------------------------------------2000VU PES/VIDEO/CONTROL/MAIN 20MH 01 C 2000VU PES/VIDEO/CONTROL/VCC 21MH 02 C 2000VU PES/VIDEO/CABIN/LH 22MH 03 C 2000VU PES/VIDEO/CABIN/RH 24MH 04 C 

R 1EFF : 051-099, 106-149, 151-199, 201-299, 1 23-36-44Page 402 1301-399, 1May 01/05 1 1 1CES 1

R  **ON A/C 151-199, 201-210, 
R  Subtask 23-36-44-865-050 
R  A. Open, safety and tag this(these) circuit breaker(s): 
R R R R R R R  ------------------------------------------------------------------------------PANEL SERVICE IDENT. LOCATION ------------------------------------------------------------------------------2000VU PES/VIDEO/VCC CTL 20MH 01 C 2000VU PES/VIDEO/VCC CTL 21MH 02 C 2000VU PES/VIDEO/CABIN/LH 22MH 03 C 2000VU PES/VIDEO/CABIN/RH 24MH 04 C
 **ON A/C 301-399,
 Subtask 23-36-44-865-050-C
 A. Open, safety and tag this(these) circuit breaker(s):
 ------------------------------------------------------------------------------PANEL SERVICE IDENT. LOCATION ------------------------------------------------------------------------------2000VU PES/VIDEO/CONTROL/MAIN 20MH 01 C 2000VU PES/VIDEO/CONTROL/VCC 21MH 02 C 2000VU PES/VIDEO/CABIN FWD/LH 22MH 03 C 2000VU PES/VIDEO/CABIN FWD/RH 24MH 04 C 2000VU PES/VIDEO/CABIN AFT/LH 23MH 05 C 2000VU PES/VIDEO/CABIN AFT/RH 25MH 06 C 
R  **ON A/C 051-099, 106-149, 151-199, 201-299, 301-399,
 Subtask 23-36-44-010-050
 B. Remove the applicable cove light panel (Ref. TASK 25-23-48-000-001).
 4. Procedure_________ 
R  **ON A/C 051-099, 201-210, 
R  (Ref. Fig. 401/TASK 23-36-44-991-001) 

R 1EFF : 051-099, 106-149, 151-199, 201-299, 1 23-36-44Page 403 1301-399, 1May 01/05 1 1 1CES 1

 Tapping Unit (TU) R Figure 401/TASK 23-36-44-991-001
R 1EFF : 051-099, 201-210, 1 23-36-44Page 404 1 1 May 01/05 1 1 1CES 1

R  **ON A/C 106-149, 211-299, 
R R  (Ref. Fig. 401A/TASK 23-36-44-991-001-B) **ON A/C 151-199, 
R  (Ref. Fig. 401B/TASK 23-36-44-991-001-A) **ON A/C 301-399,
R  (Ref. Fig. 401C/TASK 23-36-44-991-001-C) **ON A/C 051-099, 106-149, 151-199, 201-299, 301-399,
 Subtask 23-36-44-020-051
 A. Removal of the Tapping Unit NOTE : The removal of each TU is the same.____
 (1) Remove the spring latches (3) and disconnect the electrical connectors (2). (2) Put blanking caps on the disconnected electrical connectors. (3) Carefully loosen the nylatches (1) and remove the tapping unit (4). NOTE : At the end of the tapping unit lines the tapping unit ends____ with a termination plug connected to the tapping unit connector J3. If a related tapping unit is removed, remove the termination plug. 
　
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM Communications 通訊2(84)