R 1EFF : 051-099, 106-149, 151-199, 201-299, 1 23-36-22Page 410 1301-399, 1Aug 01/05 1 1 1CES 1 **ON A/C 106-149, 211-299,
Subtask 23-36-22-865-052-A
A. Make sure that this(these) circuit breaker(s) is(are) open, safetied and tagged
------------------------------------------------------------------------------PANEL SERVICE IDENT. LOCATION ------------------------------------------------------------------------------2000VU PES/VIDEO/CONTROL/MAIN 20MH 01 C 2000VU PES/VIDEO/CONTROL/VCC 21MH 02 C 2000VU PES/VIDEO/CABIN/LH 22MH 03 C
**ON A/C 151-199, 201-210,
Subtask 23-36-22-865-052
A. Make sure that this(these) circuit breaker(s) is(are) open, safetied and tagged
------------------------------------------------------------------------------PANEL SERVICE IDENT. LOCATION ------------------------------------------------------------------------------2000VU PES/VIDEO/VCC CTL 20MH 01 C 2000VU PES/VIDEO/VCC CTL 21MH 02 C 2000VU PES/VIDEO/CABIN/LH 22MH 03 C
**ON A/C 301-399,
Subtask 23-36-22-865-052-B
A. Make sure that this(these) circuit breaker(s) is(are) open, safetied and tagged
------------------------------------------------------------------------------PANEL SERVICE IDENT. LOCATION ------------------------------------------------------------------------------2000VU PES/VIDEO/CONTROL/MAIN 20MH 01 C 2000VU PES/VIDEO/CONTROL/VCC 21MH 02 C 2000VU PES/VIDEO/CABIN FWD/LH 22MH 03 C 2000VU PES/VIDEO/CABIN AFT/LH 23MH 05 C
R 1EFF : 106-149, 151-199, 201-299, 301-399, 1 23-36-22Page 411 1 1 Aug 01/05 1 1 1CES 1 **ON A/C 051-099, 106-149, 151-199, 201-299, 301-399,
4. Procedure
_________
**ON A/C 051-099,
(Ref. Fig. 401/TASK 23-36-22-991-001-B)
**ON A/C 106-149, 201-299,
(Ref. Fig. 401A/TASK 23-36-22-991-001)
**ON A/C 151-199,
(Ref. Fig. 401B/TASK 23-36-22-991-001-A) R **ON A/C 301-399,
R (Ref. Fig. 401C/TASK 23-36-22-991-001-C) **ON A/C 051-099, 106-149, 151-199, 201-299, 301-399,
Subtask 23-36-22-420-053
A. Installation of the LH Hatrack Mounted Display Unit (HMDU)
(1)
Lift the HMDU (2) and engage the rail unit (5) to the inboard mounting rail (3).
(2)
Remove the blanking caps from the electrical connectors.
(3)
Make sure that the electrical connectors are clean and in the correct condition.
(4)
Connect the electrical connectors (1) to the receptacles.
(5)
Lift the HMDU (2) and engage the rail unit (5) to the outboard mounting rail (3).
1EFF : 051-099, 106-149, 151-199, 201-299, 1 23-36-22Page 412 1301-399, 1Aug 01/05 1 1 1CES 1
(6) Install the section hoses (4) with the PULLEY ASSEMBLY - SEALING CORD (98A25207503000) to outboard the mounting rails (3).
NOTE : Make sure that the section hoses are not expanded. Move the
____ pulley assembly forward and rearward to prevent this.
**ON A/C 051-099,
Subtask 23-36-22-865-056-B
B. Remove the safety clips and the tags and close these circuit breakers: 21MH and 22MH.
**ON A/C 106-149, 151-199, 201-299,
Subtask 23-36-22-865-056
B. Remove the safety clips and the tags and close these circuit breakers: 20MH, 21MH and 22MH.
**ON A/C 301-399,
Subtask 23-36-22-865-056-A
B. Remove the safety clips and the tags and close these circuit breakers: 20MH, 21MH, 22MH and 23MH.
**ON A/C 051-099, 106-149, 151-199, 201-299, 301-399,
Subtask 23-36-22-861-052
C. Energize the Cabin Intercommunication Data System (CIDS) (Ref. TASK 23-73-00-861-001).
Subtask 23-36-22-710-053
D. Do the Operational Test of the Passenger Entertainment (Video) (Ref. TASK 23-36-00-710-001) System.
1EFF : 051-099, 106-149, 151-199, 201-299, 1 23-36-22Page 413 1301-399, 1Aug 01/05R 1 1 1CES 1
5. Close-up
________
**ON A/C 051-099,
(Ref. Fig. 401/TASK 23-36-22-991-001-B)
**ON A/C 106-149, 201-299,
(Ref. Fig. 401A/TASK 23-36-22-991-001)
**ON A/C 151-199,
(Ref. Fig. 401B/TASK 23-36-22-991-001-A) R **ON A/C 301-399,
R (Ref. Fig. 401C/TASK 23-36-22-991-001-C) **ON A/C 051-099, 106-149, 151-199, 201-299, 301-399,
Subtask 23-36-22-410-054
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM Communications 通訊2(77)
