(2)
On all the ACPs, make sure that:
-The INT/RAD selector switch is in the middle position.
-
All transmission pushbutton switches are fully out.
-
All reception pushbutton switches are pushed (no reception).
1EFF : ALL 1 23-51-00Page 509 1 1 Feb 01/98 1 1 1CES 1
(3) On the Captain's station, connect a boomset to the jack panel.
Subtask 23-51-00-865-051
B. Make sure that this(these) circuit breaker(s) is(are) closed:
-------------------------------------------------------------------------------
PANEL DESIGNATION IDENT. LOCATION
-------------------------------------------------------------------------------
R **ON A/C 001-049, 101-105, 151-199,
49VU COM/HF1 1RE1 HA14
**ON A/C ALL
49VU CAPT/LOUD/SPKR 5WW F10 49VU FWS/FWC1/SPLY 3WW F01 49VU COM/RMP/1 2RG1 G10 49VU COM/VHF/1 2RC1 G09 49VU COM/AUDIO/FLT/INTPH 9RN G08 49VU COM/AUDIO/ACP/F/O 5RN G07 49VU COM/AUDIO/ACP/CAPT 4RN G06
R **ON A/C 051-099, 106-149, 201-299, 301-399,
49VU COM HF1 1RE1 HA14
R **ON A/C 001-049, 051-099, 101-105, 151-199, 201-210, 301-399,
121VU COM NAV/HF2 1RE2 L13
**ON A/C ALL
121VU COM NAV/VHF/3 2RC3 L05 121VU COM NAV/VHF/2 2RC2 L04 121VU COM NAV/RMP/3 2RG3 L03 121VU COM NAV/RMP/2 2RG2 L02 121VU COM NAV/SELCAL 8RN M04 121VU COM NAV/ACP/THIRD/OCCPNT 6RN M02 121VU EIS/F/O/LOUD/SPKR 4WW P08 121VU EIS/FWC2/SPLY 2WW Q07
1EFF : ALL 1 23-51-00Page 510 1 1 May 01/05 1 1 1CES 1
4. Procedure
_________ R **ON A/C 001-049, 051-099, 101-105, 151-199, 201-210, 301-399, 401-499,
Subtask 23-51-00-710-054
A. Operational Test of the SELCAL System WARNING : OBEY THE RADIO REGULATIONS AND MAKE SURE THAT THE FREQUENCY IS
_______
AVAILABLE BEFORE YOU TRANSMIT.
NOTE : Do this test with the VHF1 and the HF1 systems.
____ You must do this procedure again with the VHF2, VHF3 and HF2 systems. The procedure is the same and when you use the VHF2, VHF3 and HF2 systems, refer to information between parentheses.
-------------------------------------------------------------------------------ACTION RESULT -------------------------------------------------------------------------------
1. On the RMP1:
-Set the ON/OFF selector switch to ON.
-Push the VHF1 (VHF3) pushbutton switch.
-In the STBY/CRS display window, with the dual selector knob, set the frequency that the ground station can use in VHF.
-Start this frequency. To do this, push the transfer pushbutton switch (double arrow) between the two display windows.
2.
On the RMP2, set the frequencies related to the VHF2 system. Do the procedure of paragraph 1.
3.
On the CAPT ACP:
-
The RMP shows the last frequenciesand the last function used.
-
The green LED on this pushbuttonswitch comes on.
-
The SEL indicator light (white LED) comes on (only for the VHF3 system).
-
The frequency set comes into view inthe ACTIVE display window.
1EFF : ALL 1 23-51-00Page 511 1 1 Aug 01/05 1 1 1CES 1
-------------------------------------------------------------------------------
ACTION RESULT -------------------------------------------------------------------------------
-
Push the VHF1 (VHF2, VHF3) transmission pushbutton switch.
-
Push and release the VHF1
(VHF2, VHF3) reception
pushbutton switch.
-
Push the PTT switch of the CAPT sidestick controller.
-Transmit the SELCAL code of the aircraft to the ground station. Tell the ground station to make a SELCAL call on the VHF1 (VHF2, VHF3) system.
-Release the PTT switch of the CAPT sidestick controller.
4.
On one of the ACPs, push the RESET pushbutton switch and release it.
5.
On the RMP1:
-Push the HF1 pushbutton switch
-In the STBY/CRS display window, with the dual selector knob, set the frequency that the ground station can use in HF.
-Start this frequency. To do this, push the transfer pushbutton switch (double
-
The green bars on the VHF1 (VHF2,VHF3) transmission pushbutton switch come on.
-
The reception pushbutton switch movesfully out and comes on.
-On each ACP, the amber CALL legend ofthe VHF1 (VHF2, VHF3) pushbutton switch flashes.
-You can hear the buzzer.
-On all ACPs, the amber CALL legend ofthe VHF1 (VHF2, VHF3) transmissionpushbutton switch goes off.
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM Communications 通訊2(132)
