1EFF : 051-099, 1 23-34-00Page 11 1 1 May 01/05 1 1 1CES 1
System Block Diagram
Figure 007
1EFF : 051-099, 1 23-34-00 Page 12
1 1 May 01/05
1 1
1CES 1
System Schematic
Figure 008
1EFF : 051-099, 1 23-34-00 Page 13
1 1 May 01/05
1 1
1CES 1
-INFO MODE The INFO MODE supplies only flight information pages.
-LOGO MODE The LOGO MODE supplies logos or graphics.
-TERM MODE The TERM MODE supplies airport terminal charts only.
A total of 32 modes of operation are available. The airline may select their own logos or other graphics to be shown.
1EFF : 051-099, 1 23-34-00Page 14 1 1 May 01/05 1 1 1CES 1 PASSENGER INFORMATION SYSTEM - ADJUSTMENT/TEST
______________________________________________
TASK 23-34-00-710-001
Operational Test of the Passenger Visual Information-System
1. Reason for the Job
__________________
Self Explanatory
2. Job Set-up Information
______________________
A. Referenced Information
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
23-36-00-710-001 Operational Test of the Passenger Entertainment (Video) 23-73-00-861-001 Energize the Cabin Intercommunication Data System (CIDS) 23-73-00-862-001 De-energize the Cabin Intercommunication Data System (CIDS) 24-41-00-861-002 Energize the Aircraft Electrical Circuits from the External Power 24-41-00-862-002 De-energize the Aircraft Electrical Circuits Supplied
from the External Power 31-60-00-860-001 EIS Start Procedure 31-60-00-860-002 EIS Stop Procedure 34-10-00-860-002 ADIRS Start Procedure 34-10-00-860-004 IR Alignment Procedure 34-10-00-860-005 ADIRS Stop Procedure
3. Job Set-up
__________
Subtask 23-34-00-860-052
A. Aircraft Maintenance Configuration
(1)
Energize the aircraft electrical circuits
(Ref. TASK 24-41-00-861-002).
(2)
Do the EIS start procedure (Upper ECAM DU and lower ECAM DU only) (Ref. TASK 31-60-00-860-001).
(3)
Do the ADIRS Start Procedure (Ref. TASK 34-10-00-860-002).
1EFF : 051-099, 1 23-34-00Page 501 1 1 May 01/05 1 1 1CES 1
(4)
Make sure that the Cabin Intercommunication Data System (CIDS) is energized (Ref. TASK 23-73-00-861-001).
(5)
Make sure that the Passenger Entertainment System (PES) (Video) is energized (Ref. TASK 23-36-00-710-001) and the LCD monitors are extended.
Subtask 23-34-00-865-050
B. Make sure that this(these) circuit breaker(s) is(are) open, safetied and tagged
------------------------------------------------------------------------------PANEL SERVICE IDENT. LOCATION ------------------------------------------------------------------------------121VU AUTO FLT/FMGC/2 10CA2 17 M 121VU ADIRS/ADIRU/2/28VDC 6FP2 05 N 121VU ADIRS/ADIRU/2/115VAC 4FP2 07 N 121VU ADIRS/ADIRU/2/26VAC 5FP2 09 N
2000VU PES/PVIS 189MH 05 C
4. Procedure
_________
Subtask 23-34-00-710-050
A. Test of the Passenger Visual Information System (PVIS)
(1) Do this test (without the data from the Flight Management and Guidance Computer (FMGC) and the Air Data/Inertial Reference System (ADIRS)):
-------------------------------------------------------------------------------ACTION RESULT -------------------------------------------------------------------------------
1. On the circuit breaker panel 2000VU:
-remove the safety clip(s) and the tag(s) and close this(these) circuit breaker(s): 189MH.
2. On the System Control Unit (SCU) 11MH:
-push the SYST PWR pushbutton switch.
On the LCD of the PVIS Remote ControlUnit (RCU):
-STANDBY is indicated for theinitialization and self-test period.
-
the cursor is set to SET DISPLAY MODEafter the self-test is complete.
On the monitor of the SCU 11MH:
-
the integral light of the SYST PWRpushbutton switch comes on,
1EFF : 051-099, 1 23-34-00Page 502 1 1 May 01/05 1 1 1CES 1
-------------------------------------------------------------------------------
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM Communications 通訊2(26)
