A. Aircraft Maintenance Configuration
(1)
Make sure that the access platform is in position at the access door 824 in zone 128.
(2)
Make sure that the access door 824 is open.
1EFF : ALL 1 23-33-52Page 405 1 1 May 01/05 1 1 1CES 1 1EFF : ALL 1 23-33-52Page 406 1 1 May 01/05 1 1 1CES 1 Subtask 23-33-52-865-052
Subtask 23-33-52-865-051
B. Make sure that this(these) circuit breaker(s) is(are) open, safetied and tagged
-------------------------------------------------------------------------------PANEL DESIGNATION IDENT. LOCATION -------------------------------------------------------------------------------
R **ON A/C 051-099, 201-210,
R 2000VU PES MUSIC - CTL 21MK D01
R **ON A/C 106-149, 211-299, 301-399,
R 2000VU PES 21MK D01
R **ON A/C ALL
4. Procedure_________
R (Ref. Fig. 401/TASK 23-33-52-991-001) Subtask 23-33-52-420-050
A. Installation of the PES Reproducer (1) Clean the component interface and/or the adjacent area. (2) Do an inspection of the component interface and/or the adjacent area. (3) Remove the blanking caps from the electrical connectors (1). (4) Make sure that the electrical connectors (1) are in the correct condition.
(5) Install the reproducer (5) on its rack (2). (6) Engage the nuts (3) on the lugs (4) and tighten.
B. Remove the safety clip(s) and the tag(s) and close this(these) circuit
breaker(s): R 21MK
Subtask 23-33-52-740-050
C. Do the BITE test of the PES Reproducer (Ref. TASK 23-33-00-740-002).
5. Close-up
________
Subtask 23-33-52-410-050
A. Close Access
(1)
Make sure that the work area is clean and clear of tool(s) and other items.
(2)
Close the access door 824 (Ref. TASK 52-41-00-410-002).
(3)
Remove the access platform(s).
1EFF : ALL 1 23-33-52Page 407 1 1 May 01/05 1 1 1CES 1 PASSENGER INFORMATION SYSTEM - DESCRIPTION AND OPERATION
________________________________________________________
1.
General
_______ The Passenger Visual Information System (PVIS) supplies the passengers with information on ambient aircraft flight data, times and aircraft position in the flight plan. The PVIS uses the Liquid Crystal Display (LCD) monitors and other main components of the Passenger Entertainment System (PES) (Video) to show the information on screen.
2.
Component Location
__________________
(Ref. Fig. 001)
-------------------------------------------------------------------------------FIN | FUNCTIONAL DESIGNATION | PANEL|ZONE|ACCESS | ATA
| | | | DOOR | REF. -------------------------------------------------------------------------------190MH DIGITAL INTERFACE UNIT 88VU 120 824 23-34-34 191MH REMOTE CONTROL UNIT 230 23-34-35
3. System Description
__________________ The PVIS uses the PES (video) to transmit its output data to the passenger as visual information.
A. System Integration The system receives its operational input data from the Aircraft Communication Addressing and Reporting System (ACARS), the Air Data/Inertial Reference System (ADIRS), the Centralized Fault Display System (CFDS) and the Flight Management and Guidance System (FMGS). The PVIS is made up of the subsequent main components:
-
a Remote Control Unit (RCU)
-
a Digital Interface Unit (DIU).
The RCU is installed in the video control center in the most forward of the LH overhead stowage compartments. It is the input unit on which the shown information is selected by the use of menus.
The DIU is the system computer. It is installed on the electronics rack 88VU in the rear of the electronics compartment. The DIU stores the program menus, and it receives the input data from the above named systems. It processes them for use with the stored menus. It then transforms the digital data into video signals and sends them to the PES (video) for their indication on the LCD monitors.
中國航空網(wǎng) m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機(jī)維護(hù)手冊 AMM Communications 通訊2(23)
