On the PES video SCU 11MH, on the monitor:
-
the PROGRAMMABLE PSCU page comes into view.
NOTE : Wait for a minimum of 3 minutes after the SCU power-on, then continue
____
with the procedure.
- the AUTO MODE selection page comes
into view.
2. On the SCU 11MH, MODE SELECT On the SCU 11MH, on the monitor:
area:
- push and hold the menbrane - the MAINTENANCE MODE page comes into
switch for 5 seconds. view.
3. On the SCU 11MH, on the key pad: On the SCU 11MH, on the monitor:
- push four times the '9' - the ENTER ID #:'9999' comes into
membrane switch, view,
- push ENTER the membrane switch. - the MAINTENANCE MODE selection page
comes into view.
R 1EFF : 106-149, 211-299, 301-399, 1 23-36-00Page 302 1 1 May 01/05 1 1 1CES 1
-------------------------------------------------------------------------------
ACTION RESULT -------------------------------------------------------------------------------
4. On the SCU 11MH, on the key pad: On the SCU 11MH, on the monitor:
-
push the up or down arrow membrane switch to move the cursor to the item CONFIGURATION,
-
push the ENTER membrane switch.
5. On the SCU 11MH, on the key pad:
-
push the up or down arrow membrane switch to move the cursor to the item SVDU/MONITOR CONFIG,
-
push the ENTER membrane switch.
6. On the SCU 11MH, on the key pad:
-
push the up or down arrow membrane switch to move the cursor to the item SVDU CONFIG,
-
push the ENTER membrane switch.
7. On the SCU 11MH, on the key pad:
-
push the up or down arrow membrane switch to move the cursor to the item PREDEFINED CONFIG,
-
push the ENTER membrane switch.
8. On the SCU 11MH, on the key pad:
-push the up or down arrow membrane switch for the selection of the table '14',
-
the cursor move to CONFIGURATION,
-
the CONFIGURATION selection page comes into view.
On the SCU 11MH, on the monitor:
-
the cursor move to SVDU/MONITORCONFIG,
-
the SVDU/MONITOR CONFIG selection page comes into view.
On the SCU 11MH, on the monitor:
-
the cursor move to SVDU CONFIG,
-
the SVDU CONFIG selection page comes into view.
On the SCU 11MH, on the monitor:
-
the SVDU CONFIG/ENTER SYDU TABLE #/(1-50) page comes into view.
On the SCU 11MH, on the monitor:
-
the item SVDU TABLE # '14' comes intoview,
R 1EFF : 106-149, 211-299, 1 23-36-00Page 303 1 1 May 01/05 1 1 1CES 1
-------------------------------------------------------------------------------
ACTION RESULT -------------------------------------------------------------------------------
-push the ENTER membrane switch.
9. On the SCU 11MH, on the key pad:
-push the CLEAR membrane switch again and again until the AUTO MODE selection page comes into view.
10. On the SCU 11MH:
-push the pushbutton switch MASTER POWER.
-SVDU INITIALIZATION in PROGRESS XXX% COMPLETED
When the initialization process is completed: - on the SVDU CONFIG page the following
messages come into the view:
SVDU
INITIALIZATION
COMPLETED
CHAIN A:07 SVDU
CHAIN B:07 SVDU
On the SCU 11MH, on the monitor:
On the SCU 11MH:
-the integral light of the MASTERPOWER pushbutton switch goes off.
NOTE : Wait for a minimum of 10 seconds
____ after the SCU power-off, then continue with the configuration.
R 1EFF : 106-149, 211-299, 1 23-36-00Page 304 1 1 May 01/05 1 1 1CES 1 Subtask 23-36-00-970-051
B. Configuration of the Programmable System Control System
-------------------------------------------------------------------------------ACTION RESULT -------------------------------------------------------------------------------
1. On the PES video System Control On the SCU 11MH:
Unit (SCU) 11MH:
- push the pushbutton switch - the integral light of the MASTER
MASTER POWER. POWER pushbutton switch comes on,
- all LED come on while the SCU 11MH
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM Communications 通訊2(48)
