曝光臺 注意防騙 網曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

Deviation symbols appear if there is a valid ILS signal.
The green pushbutton light comes on.
(5) Mode Select Switch
This switch selects a navigation display for the onside ND.
(6) Range Select Switch
This switch selects a range scale for the onside ND.
Note: If the mode or the range data fails, the default selection is the ROSE NAV mode and
80 nm range.
(7) ADF-VOR Select Switches
These switches select ADF or VOR bearing pointers and DME distance on the onside ND, as
well as the corresponding navaid data characteristics in any mode except PLAN mode.
(8) Optional Data Display Pushbutton
Pushing this button displays optional data in addition to the data permanently displayed in
PLAN, ARC, or ROSE NAV modes. The green pushbutton light comes on.
Only one option can be activated at a time.
A318/A319/A320/A321 FLIGHT CREW
OPERATING MANUAL
AIRCRAFT SYSTEMS
INDICATING / RECORDING SYSTEMS
EFIS CONTROLS
A318/A319/A320/A321 FLEET DSC-31-50 P 3/6
FCOM 19 AUG 10
EFIS CONTROL PANEL
Applicable to:
,
,
MSN,,,,
(1) Barometer Reference Display Window
Range : 745 hPa to 1 100 hPa.
(2) Barometer Reference Selector
a. Outer ring : For selection of the units for the barometer reference-either hectoPascals or
inches of mercury.
Note: The unit selected does not appear on the PFD.
b. Inner knob : For selection of the reference value displayed in the barometer reference
display window and on the PFD below the altitude scale.
At FCU initialization, the window displays or 29.92, depending on the unit selected.
• Pulling the knob selects the standard baro reference setting. The PFD then displays
“STD.” (Rotating the knob has no effect.)
• Pushing the knob from the STD position makes the last selected QFE or QNH baro
setting displayed.
• Pushing the knob again changes from QNH to QFE or vice versa.
The window displays “QNH” or “QFE” according to the pilot selection.
Note: QFE option is a pin program installed on the FMGC. The FMGC operates using the
selected pin program (QNH or QFE), independently of the baro reference setting
selected on the EFIS CTL panel.
A318/A319/A320/A321 FLIGHT CREW
OPERATING MANUAL
AIRCRAFT SYSTEMS
INDICATING / RECORDING SYSTEMS
EFIS CONTROLS
A318/A319/A320/A321 FLEET DSC-31-50 P 4/6
FCOM 19 AUG 10
(3) FD Pushbutton
Pushing this button removes the FD bars from the associated PFD (or removes the flight path
director symbol if the TRK FPA reference is selected).
The pushbutton light goes out.
Pushing it again restores the FD bars (or the FPD symbol) and the green pushbutton light
comes on.
(4) LS Pushbutton
Pushing this button displays the localizer and glide slope scales on the PFD.
Deviation symbols appear if there is a valid ILS signal.
The green pushbutton light comes on.
(5) Mode Select Switch
This switch selects a navigation display for the onside ND.
(6) Range Select Switch
This switch selects a range scale for the onside ND.
Note: If the mode or the range data fails, the default selection is the ROSE NAV mode and
80 nm range.
(7) ADF-VOR Select Switches
These switches select ADF or VOR bearing pointers and DME distance on the onside ND, as
well as the corresponding navaid data characteristics in any mode except PLAN mode.
(8) Optional Data Display Pushbutton
Pushing this button displays optional data in addition to the data permanently displayed in
PLAN, ARC, or ROSE NAV modes. The green pushbutton light comes on.
Only one option can be activated at a time.
A318/A319/A320/A321 FLIGHT CREW
OPERATING MANUAL
AIRCRAFT SYSTEMS
INDICATING / RECORDING SYSTEMS
EFIS CONTROLS
A318/A319/A320/A321 FLEET DSC-31-50 P 5/6
FCOM 19 AUG 10
OTHER EFIS CONTROLS
Applicable to: ALL
(1) OFF/BRT knobs
• These knobs turn the PFD and ND display units on and off, and control their brightness.
• The display brightness adjusts automatically for changing light conditions, and is also
adjusted manually.
PFD Brightness Control Knob
Rotating this knob all the way counterclockwise switches off the PFD. In this case, the PFD
image is automatically displayed on the NDU, but the pilot may recover the ND by means of the
PFD-ND XFR pushbutton .
ND Brightness Control Knob
The outer knob controls the brightness of both the weather radar image and EGPWS terrain
display.
The inner knob controls the general brightness of the ND symbols.
Rotating this knob all the way counterclockwise switches off the NDU.
(2) PFD/ND Pushbutton
Pushing this button interchanges the PFD and the ND.
　
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320機組操作手冊FLIGHT CREW OPERATING MANUAL 3(140)