32-51-04
ALL ú ú 01 Page 606 ú Oct 18/00
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400 MAINTENANCE MANUAL
NOSE GEAR STEERING ACTUATOR - MAINTENANCE PRACTICES
___________________________________________________
1. General_______
A. This subject has procedures for one task, the replacement of the O-ring seals located at the aft and the forward end of the steering actuator transfer tube.
B. Replacement of the seal for leakage at the aft end requires the removal of the transfer tube attaching hardware.
C. Replacement of the seal for leakage at the forward end requires the repositioning of the actuator barrel and the removal of the transfer tube.
D. Removing the steering actuator from the airplane is not necessary for either the forward or the aft seal replacements.
TASK 32-51-05-002-001
2. Transfer Tube O-ring Seal Replacement_____________________________________
A. Special Tools and Equipment
(1)
6MIT65B82591 - Barrel nut torque adapter (or equivalent)
B.
Consumable Materials
(1)
A00303 Adhesive - RTV 174 Grade 1
(2)
A00704 Sealant - Silicone, RTV 162
(3)
B00083 Solvent - Aliphatic Naphta, TT-N-95
C.
Parts ~.............................................................................. | AMM | | AIPC | ................. ............................ | FIG | ITEM | NOMENCLATURE | SUBJECT | FIG | ITEM | ................................................................................ | 201 | 1 | Transfer Tube Retainer | 32-51-00 | 01 | 165 | | | 2 | Backing Plate | | | 170 | | | 3 | Bolt | | | 155 | | | 4 | Piston Seal Set | | | 150 | | | 5 | Transfer Tube | | | 145 | | | 6 | Washer | 32-13-24 | 01 | 60 | | | 7 | Key | | | 175 | 2......…........…...................................…..........…......…........1
D.
References
(1)
AMM 09-11-00/201, Towing
(2)
AMM 29-11-00/201, Main Hydraulic Supply System
(3)
AMM 32-00-30/201, Landing Gear Door Locks
(4)
AMM 32-21-03/201, Nose Gear Torsion Links
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
32-51-05
ALL ú ú 01 Page 201 ú Feb 15/98
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400
MAINTENANCE MANUAL
E. Access
(1)
Location Zone
715 Nose Landing Gear
F.
Prepare for Removal
S 492-002
WARNING: YOU MUST CAREFULLY INSTALL THE GROUND LOCKS IN ALL LANDING
_______ GEAR. AN ACCIDENTAL RETRACTION OF THE LANDING GEAR CAN CAUSE INJURY TO PERSONS AND DAMAGE TO EQUIPMENT.
(1) Install the ground locks in all landing gear (AMM 09-11-00/201).
S 492-025
WARNING: YOU MUST CAREFULLY DO THE STEPS IN THE TASK BELOW TO INSTALL
_______ THE DOOR LOCKS ON THE LANDING GEAR DOORS. THE DOORS CAN CLOSE QUICKLY IF YOU DO NOT INSTALL THE DOOR LOCKS CORRECTLY. THIS CAN CAUSE INJURY TO PERSONS OR DAMAGE TO EQUIPMENT.
(2)
Do this task: "Installation of the Door Locks on the Nose Landing Gear" (AMM 32-00-30/201).
S 492-032
(3)
Do this task: "Installation of the Door Locks on the Wing Landing Gear" (AMM 32-00-30/201).
S 492-033
(4)
Do this task: "Installation of the Door Locks on the Body Landing Gear" (AMM 32-00-30/201).
S 862-031
(5)
Do this task: "Hydraulic System Depressurization" (AMM
29-11-00/201).
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú 中國航空網 m.k6050.com 航空翻譯 www.aviation.cn 本文鏈接地址：747-400 AMM 飛機維護手冊 起落架 LANDING GEAR 8(23)
