S 865-300

 (7)
Close these circuit breakers and remove the DO-NOT-CLOSE tags:

 (a)  
On the main power distribution panel, P6: 1) 6C18, JTSN NOZZLE VLV CONT R 2) 6D18, JTSN NOZZLE VLV CONT L

 S 445-310
 WARNING: MAKE SURE THAT PERSONS AND EQUIPMENT ARE CLEAR OF THE LE AND TE
_______ FLAPS AND FLAP DRIVE MECHANISMS BEFORE YOU MOVE THE FLAP CONTROL LEVER. WITH HYDRAULIC POWER REMOVED, THE FLAPS WILL MOVE AUTOMATICALLY BY ELECTRICAL POWER WHEN YOU MOVE THE FLAP CONTROL LEVER. THIS CAN CAUSE INJURY TO PERSONS OR DAMAGE TO EQUIPMENT.
 (8)
Do this task: Leading Edge Flaps Activation, (AMM 27-81-00/201).

 S 865-245

 (9)  
Remove the electrical power, if it is not necessary for other tasks (AMM 24-22-00/201).

 TASK 28-22-00-705-315
 6.  Engine Fuel Shutoff Valves (Spar Valves) - Fuel Transfer Operational Test_________________________________________________________________________ (Fig. 504)
 A.  General
 (1)  
The engine fuel shutoff valves will be referred to as the spar valves in this procedure.

 (2)  
You can test one or all four of the spar valves in this procedure.

 (3)  
This task pressurizes the fuel-feed manifold with the spar valves in the closed position to make sure the spar valves do not leak.

 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 28-22-00
 ALL  ú ú 18 Page 537 ú Oct 18/00
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400
MAINTENANCE MANUAL

FUEL MANAGEMENT CONTROL MODULE, M154 (REF)
FUEL CONTROL
NO. 1 NO. 2  NO. 3 NO. 4 SWITCHES
FUEL CONTROL FUEL CONTROL FUEL CONTROL FUEL CONTROL SEE A SWITCH, S211 SWITCH, S212 SWITCH, S213 SWITCH, S214
FUEL CONTROL SWITCHES
A
INBOARD STRUT
OUTBOARD STRUT
FUEL PUMP
FUEL PUMP

SEE B
SEE B

MAIN FUEL
SUPPLY LINE

FUEL PUMP DRAIN PLUG
SEE C
FUEL PUMP LOCATION
B
PLUG
PACKING
FUEL PUMP MAIN FUEL
SUPPLY FLANGE

FUEL PUMP DRAIN PLUG
C
Engine Fuel Shutoff Valve (Spar Valve) Test Setup
Figure 504

 F55147
 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 28-22-00
 ALL  ú ú 13 Page 538 ú Feb 10/96
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400
MAINTENANCE MANUAL

 (4)  
To do a check for fuel leaks, you must remove the drain plug(s) on the applicable engine fuel pump.

 (a)  
The engine fuel pump is installed on the engine main gearbox at the 5 o'clock position.

 (b)  
You can get the access to the engine fuel pump when you open the left and right half of the thrust reverser.

 (5)  
This task operates the fuel boost pumps in the inboard and outboard main tanks. Make sure the minimum and maximum fuel quantities called out in the prepare for the test procedure are available.

 B.
Equipment

 (1)  
Container - 5 gallon (20 liter) capacity, suitable for the
 collection of fuel.

 C.
Consumable Materials

 (1)  
D00128 Petrolatum, VV-P-236

 D.
References

 (1)  
AMM 24-22-00/201, Manual Control

 (2)  
AMM 28-22-07/601, Engine Fuel Feed Lines and Couplings

 (3)  
AMM 28-22-16/401, Fuel System Card File

 (4)  
AMM 27-81-00/201, Leading Edge Flaps

 (5)  
AMM 31-61-00/501, Integrated Display System (IDS)

 (6)  
AMM 34-61-02/401, Control Display Unit

 (7)  
AMM 71-00-00/501, Power Plant

 (8)  
AMM 71-11-04/201, Fan Cowl Panels

 (9)  
AMM 71-11-06/201, Core Cowl Panels

 (10)
 AMM 78-31-00/201, Thrust Reverser System

 E.
Access

 (1)  
Location Zones
 221 Control Cabin, Left
 222 Control Cabin, Right
 412 Engine 1 - Gearbox - 5 O'clock position
　
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：747-400 AMM 飛機維護手冊 燃油 FUEL 2(94)