PRINTED 
NOTE:____  REFER TO THE CARD LOCATION PLACARD FOR THE EXACT POSITION  CIRCUIT CARDS (EXAMPLES) 
OF EACH TYPE OF PRINTED CIRCUIT CARD.  FUEL SYSTEM CARD FILE, M7852 
L 

Engine Fuel Feed System - Component Location
Figure 102 (Sheet 7)

EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 28-22-00
 ALL  ú ú 01 Page 112 ú Feb 10/92
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400 MAINTENANCE MANUAL
 ENGINE FUEL FEED SYSTEM - ADJUSTMENT/TEST
_________________________________________
 1.  General_______
 A.  This procedure contains instructions to do an operational test of the fuel-feed system for the engines.
 (1)  
This procedure contains these tasks:

 (a)  
Engine Crossfeed Valves Operational Test

 (b)  
Fuel-Feed Pumps Operational Test

 1)  This task contains an operational test of these fuel pumps: a) Main tank boost pumps b) Override/jettison pumps (center wing tank) c) Override/jettison pumps (No. 2 and 3 main tanks)

 (c)  
Engine Spar Valve Operational Test

 (d)  
Fuel Crossfeed Valves - Fuel Transfer Operational Test

 (e)  
Engine Spar Valve - Fuel Transfer Operational Test

 (2)  
The operational test contains short tests for the components in the fuel-feed system for the engines. The test makes sure the components operate correctly. To do this you must look at the EICAS status page for the necessary EICAS messages. If there are no EICAS messages that show, the component is serviceable.

 (3)  
The operational test also give instructions to compare the airplane configuration with the symbols on the fuel synoptic to make sure the airplane and fuel synoptic agree.

 (4)  
The valve fuel transfer operational tests make sure that the valves are in the correct commanded position and that the valve bodies and valve adapter shafts are installed correctly.

 TASK 28-22-00-705-001
 2.  Fuel Crossfeed Valves - Operational Test________________________________________
 A.  General
 (1)  
This task does a test of the crossfeed valve control, indication and operation.

 B.  
References

 (1)  
AMM 24-22-00/201, Manual Control

 (2)  
AMM 27-81-00/201, Leading Edge Flap System

 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 28-22-00
 ALL  ú ú 06 Page 501 ú Oct 18/00
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400
MAINTENANCE MANUAL

 (3)  
AMM 28-22-16/401, Fuel System Card File

 (4)  
AMM 31-61-00/501, Integrated Display System (IDS)

 (5)  
AMM 32-09-02/201, Air/Ground Relays

 (6)  
AMM 34-61-02/401, Control Display Unit

 (7)  
AMM 45-10-00/501, Central Maintenance Computer (CMC)

 C.
Access

 (1)  
Location Zones
 221 Control Cabin, Left
 222 Control Cabin, Right

 D.
Preconditions

 S 865-492
 (1)  
These conditions are necessary for this task:

 (a)  
Fuel-Feed System serviceable.

 (b)  
A specific fuel quantity is not necessary for this task.

 (c)  
Electrical Power On (AMM 24-22-00/201).

 (d)  
Leading Edge Flaps serviceable (AMM 27-81-00/201).

 (e)  
Fuel System Card File serviceable (AMM 28-22-16/401).

 (f)  
Integrated Display System (IDS) serviceable (AMM 31-61-00/501).

 (g)  
Airplane must be in the ground mode (AMM 32-09-02/201).

 (h)  
CDU installed (AMM 34-61-02/401).

 (i)  
Central Maintenance Computer (CMC) serviceable (AMM 45-10-00/201).

 E.
Prepare for the Test

 S 865-002
 (1)  
Supply the electrical power (AMM 24-22-00/201).
　
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：747-400 AMM 飛機維護手冊 燃油 FUEL 2(77)