S 655-062
 (4)  
Make sure the fuel tanks contain these fuel quantities:

 (a)  
No. 2 and 3 main tanks - minimum of 15,000 lbs (6800 kgs) of fuel in each tank.

 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 28-22-00
 ALL  ú ú 07 Page 511 ú Oct 18/00
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400 MAINTENANCE MANUAL
 (b)  
No. 1 and 4 main tank - minimum of 2500 lbs (1200 kgs) of fuel in each tank.

 (c)  
Center wing tank - minimum of 15,000 pounds (6800 kilograms) of fuel.

 (d)  
The No. 2 and 3 reserve tanks can contain some quantity of fuel.

 S 655-063
 (5)  
If the fuel quantity is not sufficient, refuel the tank(s)
 (AMM 12-11-01/301) or move fuel from a different tank
 (AMM 28-26-00/201) if it is necessary.

 S 865-064

 (6)  
Make sure that all the FUEL CONTROL switches on the control stand are set to the CUTOFF position.

 S 865-065

 (7)  
Make sure all of the pump switches on the fuel management control module, M154, (P5 pilots' overhead panel) are off (the white ON indication light in each pump switch does not show).

 S 865-066

 (8)  
Make sure all of the crossfeed valve switches on the fuel management control module, M154, are off (the white flowbar indication light in each crossfeed valve switch does not show).

 F.
Boost Pump Operational Test (Figure 502)

 S 865-143
 (1)  
Look at the fuel management control module, M154.

 (a)  
Make sure the amber PRESS indication light shows in each of these switches: 1) MAIN 1 FWD 2) MAIN 1 AFT 3) MAIN 2 FWD 4) MAIN 2 AFT 5) MAIN 3 FWD 6) MAIN 3 AFT 7) MAIN 4 FWD 8) MAIN 4 AFT

 S 865-357
 (2)  
Look at the top EICAS display.

 (a)  
Make sure these EICAS caution messages show:
 1) FUEL PRESS ENG 1
 2) FUEL PRESS ENG 2
 3) FUEL PRESS ENG 3
 4) FUEL PRESS ENG 4

 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 28-22-00
 ALL  ú ú 04 Page 512 ú Jun 18/99
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400 MAINTENANCE MANUAL
 S 865-316
 (3)  
Look at the fuel synoptic display.

 (a)  
Make sure the fuel boost pump symbols are white and the flow bars in the pump symbols do not show.

 S 715-112
 (4)  
Do these steps to operate the forward boost pump for the No. 1 main tank.

 (a)  
Put the MAIN 1 FWD switch to the ON position.

 (b)  
Look at the light indication in the MAIN 1 FWD switch. 1) Make sure the amber PRESS indication light goes off. 2) Make sure the white ON indication light comes on.

 (c)  
Monitor the fuel synoptic.

 1)  Make sure the pump box symbol for the MAIN 1 forward boost pump changes color in this sequence: a) White (pump off) b) Amber (pump on - low pressure) (momentarily) c) Green (pump on - pressure)

 (d)  
After approximately 15 seconds, look at the main and auxiliary EICAS displays. 1) Make sure these EICAS messages do not show:

 a) FUEL PRESS ENG 1 (caution)
 b) FUEL PUMP 1 FWD (advisory)
 c) FUEL PUMP 1 FWD (status)

 (e)  
Put the MAIN 1 FWD switch to the off position.

 (f)  
Look at the light indication in the MAIN 1 FWD switch. 1) Make sure the white ON indication light goes off. 2) Make sure the amber PRESS indication light comes on.

 (g)  
Monitor the fuel synoptic.

 1)  Make sure the pump box symbol for the MAIN 1 forward boost pump changes color in this sequence: a) Green (pump on - pressure) b) Amber (pump on - low pressure) (does not always show) c) White (pump off)

 (h)  
After approximately 15 seconds, look at the main and auxiliary EICAS displays. 1) Make sure these EICAS messages do not show:

 a) FUEL PUMP 1 FWD (advisory)
　
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：747-400 AMM 飛機維護手冊 燃油 FUEL 2(82)