2)  Make sure this EICAS message shows on the main EICAS display: a) FUEL PRESS ENG 1 (caution)
 S 715-114
 (5)  
If it is necessary, do the steps again for these boost pumps:

 (a)  
No. 1 main tank aft boost pump

 (b)  
No. 2 main tank forward boost pump

 (c)  
No. 2 main tank aft boost pump

 (d)  
No. 3 main tank forward boost pump

 (e)  
No. 3 main tank aft boost pump

 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 28-22-00
 ALL  ú ú 10 Page 513 ú Jun 18/99
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400 MAINTENANCE MANUAL
 (f)  
No. 4 main tank forward boost pump

 (g)  
No. 4 main tank aft boost pump

 G.  
Override/Jettison Pump Operational Test (Fig. 502)

 S 865-115
 (1)  
Look at the fuel system management control module, M154.

 (a)  
Make sure the amber PRESS indication light does not show in any of these switches: 1) CTR L 2) CTR R 3) OVRD 2 FWD 4) OVRD 2 AFT 5) OVRD 3 FWD 6) OVRD 3 AFT

 S 865-317
 (2)  
Look at the EICAS display.

 (a)  
Make sure these EICAS messages show on the main EICAS display: 1) FUEL OVRD CTR L (advisory) 2) FUEL OVRD CTR R (advisory) 3) FUEL OVRD 2 AFT (advisory) 4) FUEL OVRD 2 FWD (advisory) 5) FUEL OVRD 3 AFT (advisory) 6) FUEL OVRD 3 FWD (advisory)

 (b)  
Make sure these EICAS messages do not show on the auxiliary EICAS display: 1) FUEL OVRD CTR L (status) 2) FUEL OVRD CTR R (status) 3) FUEL OVRD 2 AFT (status) 4) FUEL OVRD 2 FWD (status) 5) FUEL OVRD 3 AFT (status) 6) FUEL OVRD 3 FWD (status)

 S 865-117
 (3)  
Look at the fuel synoptic display.

 (a)  
Make sure the override/jettison pump symbols (center wing tank and No. 2 and 3 main tanks) are white and the flow bars in the pump symbols do not show.

 S 715-118
 (4)  
Do these steps to operate the left override/jettison pump in the center wing tank.

 (a)  
Put the CTR L switch to the ON position.

 (b)  
Look at the light indication in the CTR L switch. 1) Make sure the white ON indication light comes on. 2) Make sure the amber PRESS indication light does not stay

 on.

 (c)  
Monitor the fuel synoptic.

 1)  Make sure the pump box symbol for the CENTER L override/jettison pump changes color in this sequence: a) White (pump off)
 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 28-22-00
 ALL  ú ú 07 Page 514 ú Oct 18/00
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400
MAINTENANCE MANUAL

 b) Amber (pump on - low pressure) (momentarily) c) Green (pump on - pressure)
 (d)  
After approximately 15 seconds, look at the main and auxiliary EICAS displays. 1) Make sure these EICAS messages do not show:

 a) FUEL OVRD CTR L (advisory)
 b) FUEL OVRD CTR L (status)

 (e)  
Put the CTR L switch to the off position.

 (f)  
Look at the light indication in the CTR L switch.
 1) Make sure the white ON indication light goes off.

 (g)  
Monitor the fuel synoptic.

 1)  Make sure the pump box symbol for the CTR L override/jettison pump changes color in this sequence: a) Green (pump on - pressure) b) Amber (pump on - low pressure) (does not always show) c) White (pump off)

 (h)  
After approximately 15 seconds, look at the main and auxiliary EICAS displays. 1) Make sure this EICAS message does show:

 a) FUEL OVRD CTR L (advisory) 2) Make sure this EICAS message does not show: a) FUEL OVRD CTR L (status)
 S 715-318
 (5)  If it is necessary, do the steps again for these override/jettison pumps:
 NOTE: Make sure the left and right center wing tank switches (CTR L
____ and CTR R) are in the off position when you operate the override/jettison pump switches for the No. 2 and 3 main tanks. The override/jettison pumps for the No. 2 and 3 main tanks will not operate if one or more of the pump switches for the center wing tank are ON.
　
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：747-400 AMM 飛機維護手冊 燃油 FUEL 2(83)