曝光臺 注意防騙 網曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

 (2)  Open this circuit breaker, on the P415 Power Distribution Center -Right panel, and attach a DO-NOT-CLOSE tag:
 (a)  415E32, ACM MASS FLOW IND
 S 494-018
 WARNING: MAKE SURE THE DOWNLOCKS ARE INSTALLED ON THE MAIN LANDING GEAR.
_______ IF YOU MOVE THE CONTROL LEVER WITHOUT THE DOWNLOCKS INSTALLED, THE LANDING GEAR CAN RETRACT AND CAUSE INJURIES TO PERSONS OR DAMAGE TO EQUIPMENT.
 (3)  
Make sure the downlocks are installed on the main landing gear (Ref 32-00-30/201).

 (4)  
Install the locks for the body and wing gear doors.

 S 494-019
 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 21-51-17
 ALL  ú ú 01 Page 401 ú Oct 10/91
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A

747-400 
MAINTENANCE MANUAL 
FORWARD BULKHEAD WHEELWELL  AIRFLOW SIGNAL CONDITIONER 
SEE  A 

AIR CONDITIONING EQUIPMENT BAY
BOLT (4 PLACES)
FWD
AIRFLOW SIGNAL CONDITIONER
ELECTRICAL CONNECTOR
SUPPORT
ANGLE
(2 PLACES)

A
Airflow Signal Conditioner Installation Figure 401
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 21-51-17
 ALL  ú ú 01 Page 402 ú Feb 10/89
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400 MAINTENANCE MANUAL
 D. Remove the Signal Conditioner
 S 034-006
 (1)  
Disconnect the electrical connector from the signal conditioner.

 S 034-007

 (2)  
Remove the bolts that hold the signal conditioner to the support angles.

 S 024-024

 (3)  
Remove the signal conditioner.

 TASK 21-51-17-404-008
 3.  Airflow Signal Conditioner Installation (Fig. 401)_______________________________________
 A. References
 (1)  
21-00-00/201, Air Conditioning

 (2)  
24-22-00/201, Manual Control

 (3)  
AMM 45-10-00/201, Central Maintenance Computer System

 (4)  
IPC 21-51-17 Fig. 2

 (5)  
SSM 21-53-01

 (6)  
WDM 21-53-11

 B. Access
 (1)  Location Zone
 136 Wing Landing Gear Well, RH

 C. Install the Signal Conditioner
 S 424-009
 (1)  Put the signal conditioner in its position.
 (a)  Make sure the electrical receptacle points forward.
 S 434-023
 (2)  
Install the bolts and the washers that hold the signal conditioner to the support angles.

 S 434-010

 (3)  
Connect the electrical connector DM594 to the signal conditioner.

 D. Do the Installation Test for the Signal Conditioner
 S 864-011
 (1)  
Remove the DO-NOT-CLOSE tag and close this circuit breaker on the P415 Power Distribution Center-Right panel:

 (a)  415E32, ACM MASS FLOW IND

 (2)  
Supply electrical power (Ref 24-22-00/201).

 (3)  
Push the PACK RST switch, on the P5 panel.

 S 864-012
 S 864-013
 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 21-51-17
 ALL  ú ú 01 Page 403 ú Oct 18/00
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400 MAINTENANCE MANUAL
 S 034-025
 (4)  
Remove the DO-NOT-OPERATE tag from one of the PACKS selectors, on the P5 panel.

 S 864-014

 (5)  
Operate the applicable air cooling pack (Ref 21-00-00/201).

 S 714-015

 (6)
Get access to the ECS EICAS maintenance page (AMM 45-10-00/201).

 S 714-020

 (7)  
Make sure the PACK FLOW is between 1100 CFM (31 CMM) and 2900 CFM (83 CMM).

 E. Put the airplane to its usual condition
　
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：747-400 AMM 飛機維護手冊 空調 AIR CONDITIONING 2(50)