(2)
36-00-00/201, Pneumatic System
(3)
AMM 45-10-00/201, Central Maintenance Computer System
(4)
AIPC 21-61-10 Fig. 10
(5)
AIPC 21-61-10, Fig. 10A
(6)
WDM 21-61-93
(7)
SSM 21-61-05
B. Access
(1)
Location Zone
133 Air Conditioning Equipment Bay, LH
(2)
Access Panel
191N-L Air Conditioning Access Door
C. Prepare to Remove the Pressure Sensor
S 864-002
(1)
Supply electrical power (Ref 24-22-00/201).
S 864-003
(2)
Set the EICAS ECS maintenance page from the CMC CDU
(AMM 45-10-00/201).
(3)
Remove the pressure from the pneumatic system (Ref 36-00-00/201).
S 214-021
(4)
Make sure that the EICAS ECS maintenance page shows that the TRIM AIR PRESS indication is approximately 0.
S 864-006
(5)
Open this circuit breaker on the P180 DC Power Distribution panel and attach a DO-NOT-CLOSE tag:
S 864-005
(a) 180F17, TRIM AIR PRESS SENSOR
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
21-61-13
ALL ú ú 02 Page 401 ú Jun 18/01
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400
MAINTENANCE MANUAL
TRIM AIR PRESSURE SENSOR BSEE
SEE A
FWD
EQUIPMENT BAY AIR CONDITIONING
FITTING
ELECTRICAL CONNECTOR FITTING SENSOR EXCHANGER (REF) PACK 2 HEAT
BOLT/NUT (4 PLACES) A
B
Trim Air Pressure Sensor Installation Figure 401
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
21-61-13
ALL ú ú 01 Page 402 ú Oct 10/88
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400 MAINTENANCE MANUAL
S 014-007
(6) Open the access panel, 191N-L (Ref 06-09-03/201).
D. Remove the Pressure Sensor
S 214-008
(1)
Find the pressure sensor on the bulkhead which is adjacent to the heat exchanger for the pack 2.
S 034-022
(2)
Disconnect the electrical connector, DT1616 from the pressure sensor.
S 034-009
WARNING: MAKE SURE THERE IS NO PRESSURE IN THE PNEUMATIC SYSTEM BEFORE
_______ YOU REMOVE THE TUBE FITTINGS FROM THE PRESSURE SENSOR. INJURY TO PERSONS CAN OCCUR IF YOU TRY TO REMOVE THE TUBE FITTINGS WHEN THERE IS PRESSURE IN THE PNEUMATIC SYSTEM.
(3)
Remove the tube fittings (2 locations) from the pressure sensor.
S 034-010
(4)
Remove the nuts and the bolts (4 locations) from the pressure sensor.
S 024-023
(5)
Remove the pressure sensor from the bracket.
TASK 21-61-13-404-011
3. Trim Air Pressure Sensor Installation (Fig. 401)_____________________________________
A. References
(1)
06-09-03/201, Body Panels and Access Doors
(2)
21-00-00/201, Air Conditioning
(3)
24-22-00/201, Manual Control
(4)
AMM 45-10-00/201, Central Maintenance Computer System
(5)
AIPC 21-61-10 Fig. 10
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
21-61-13
ALL ú ú 03 Page 403 ú Jun 18/01
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400
MAINTENANCE MANUAL
(6)
AIPC 21-61-10, Fig. 10A
(7)
WDM 21-61-93
(8)
SSM 21-61-05
B. Access
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：747-400 AMM 飛機維護手冊 空調 AIR CONDITIONING 2(158)
