(b)
Remove the forward hinge from the inlet door.
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
21-62-02
ALL ú ú 03 Page 601 ú Oct 18/01
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400
MAINTENANCE MANUAL
TORQUE SHAFT
RAM AIR
INLET DOORS ACCESS
SEE A PANEL
ACTUATOR
AFT HINGE FORWARD HINGE
SEE C SEE
B FWD
RAM AIR INLET DOORS
A
COLLAR HINGERETAINER
SPRING (7 LOCATIONS) PIN PIN HINGE
SEAL
HINGE PIN
HINGE
HOLES
NUT PLATE (8 LOCATIONS)
SPRING
PIN
DOOR
DOOR
BOLT HINGE (8 LOCATIONS)SPACERS
HINGE PIN
FORWARD HINGE AFT HINGE
LOCKBOLT
B C
(7 LOCATIONS)
Ram Air Inlet Door Inspection
Figure 601
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
21-62-02
ALL ú ú 01 Page 602 ú Oct 18/01
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400 MAINTENANCE MANUAL
S 026-027
(4)
Remove the seal from the forward hinge.
S 026-026
(5)
Remove the retainer from the forward hinge.
S 026-007
(6)
Remove the hinge pins from the hinges.
S 166-025
(7)
If it is necessary, remove the dirt from the hinge pins and the hinges.
E. Inspect the Inlet Door Hinges
S 216-021
(1)
Make sure the plating is not worn off of the hinge pin.
S 226-020
(2)
Make sure the wall thickness of all the hinge pin holes is greater than 0.040 inches (1.02 mm).
S 966-019
(3)
If the hinge pin or the hinge does not meet these conditions, install a new hinge on the ram air inlet door.
F. Install the Inlet Door Hinge
S 426-021
(1) Put the hinge pins in the hinges, if it is necessary.
S 166-031
WARNING: DO NOT GET SOLVENTS IN YOUR MOUTH, OR YOUR EYES, OR ON YOUR
_______ SKIN. DO NOT BREATHE THE FUMES FROM SOLVENTS. SOLVENTS ARE HAZARDOUS MATERIALS. SOLVENTS MAY BE FLAMMABLE OR HARMFUL TO THE ENVIRONMENT. REFER TO PRODUCT MATERIAL SAFETY DATA SHEETS (MSDS) AND LOCAL REQUIREMENTS FOR PROPER HANDLING PROCEDURES.
(2)
Use the ethyl alcohol or the isopropyl alcohol to clean the mating surfaces of the seal and the forward hinge.
(3)
Apply a thin layer of adhesive to the seal.
S 026-029
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
21-62-02
ALL ú ú 01 Page 603 ú Oct 18/01
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400 MAINTENANCE MANUAL
S 026-030
(4)
Put the seal in its position against the forward hinge.
S 426-025
(5)
Install the aft hinge on the aft section of the inlet door.
(a)
Put the aft hinge in its position against the inlet door.
(b)
Install the retainer and the nine lockbolts to hold the hinge to the inlet door.
S 426-024
(6) Install the forward hinge to the forward section of the inlet door.
(a)
Put the forward hinge in its position against the inlet door.
(b)
Install the retainer and the rivets to hold the forward hinge to the inlet door.
S 426-023
(7) Install the forward and aft section of the inlet door (Ref 21-62-02/401)
TASK 21-62-02-206-036
3. Ram Air Inlet Door - Visual Inspection (Fig. 601)______________________________________
A. Access
(1) Location Zone 123 Wing to Body Fairing, Forward Lower Half, LH 124 Wing to Body Forward Lower Half, RH
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：747-400 AMM 飛機維護手冊 空調 AIR CONDITIONING 2(171)
