frame.
(b)
Remove the solvent with a cheesecloth before the solvent becomes dry.
(c)
Continue to clean the mating surfaces with the solvent until the mating surfaces are clean.
(d)
Mix the adhesive fully before you apply it to the mating surfaces.
(e)
Apply the adhesive to the mating surface of the reveal seal and outer reveal.
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
56-22-00
ALL ú ú B01 Page 405 ú Mar 15/97
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A 737-300/400/500MAINTENANCE MANUAL
(f) Let the adhesive dry for 5 to 20 minutes. Make sure the adhesive is tacky but does not bond to your fingers when you touch it lightly.
NOTE:____ To make the adhesive tacky and wet again, apply the cleaner with a cheesecloth to the adhesive.
(g) Push the reveal seal and outer reveal tightly together. Make sure you remove all of the air between the mating surfaces.
NOTE:____ The adhesive will have 35% of its maximum strength immediately when you let it dry for the maximum time permitted. Do not use heat to dry the adhesive.
(h) (i) (j) (k) Clean the area around the reveal seal and outer reveal with the solvent and a cheesecloth if it is necessary.Install the outer pane seal to the outer pane.Put the outer pane with the outer pane seal on the window outboard frame and hold the outer pane.Put the spring assembly for the outer pane on the window outboard frame.
CAUTION:_______ DO NOT COMPRESS THE SPRING ASSEMBLY TO 0.18 INCH OR LESS WHEN YOU INSTALL THE SPRING RETAINERS. THIS CAN PERMANENTLY SET THE
SPRING ASSEMBLY AND PREVENT A SATISFACTORY WEATHER SEAL WHEN
YOU INSTALL THE OUTER PANE.
(l) (m) (n) (o) (p) (q) Put the spring retainer on the window outboard frame.Install the spring retainer screws to each spring retainer and release the outer pane.Remove the sheet of cloth or equivalent material from the inner surface of the outer pane.Clean the inner surface of the outer pane (Ref 12-16-03/301).Apply the antistatic agent to the inner surface of the outer pane (Ref 12-16-03/301).Remove the sheet of cloth or equivalent material from the outer surface of the middle pane.
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
56-22-00
ALL ú ú B02 Page 406 ú Nov 12/00
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A 737-300/400/500MAINTENANCE MANUAL
(r) Examine the middle pane for scratches, marks, or dents which
you can see from a position in the airplane.
1) Replace the middle pane if you see scratches, marks, or
dents from a position in the airplane.
(s) Clean the outer surface of the middle pane (AMM 12-16-03/301).
(t) Apply the antistatic agent to the outer surface of the middle
pane (AMM 12-16-03/301).
CAUTION:_______ BE CAREFUL WHEN YOU MOVE AND TOUCH THE OUTER REVEAL. THE OUTER
REVEAL IS PLASTIC AND CAN BE EASILY DAMAGED IF YOU ARE NOT
CAREFUL.
(u) Install the reveal seal to the outer reveal.
(v) Put the outer reveal with the reveal seal on the window inboard
frame.
(w) Put the middle pane seal on the middle pane.
(x) Put the middle pane with the middle pane seal on the window
inboard frame and hold the middle pane.
(y) Put the retainer and retainer seal on the window inboard frame.
(z) Install the retainer screws to hold the middle pane in its
position and release the middle pane.
中國航空網(wǎng) m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：737-300 400 500 AMM 飛機維護手冊 WINDOWS(61)
